TDP Exchange

[cianco]

Good Morning,

Anyone know what the follow message means?

TDP MSExchg ACN3502 Data Protection for Exchange: full backup of

SG1 from server node1 failed, rc = 418

 

[nezih]

if you'll send actlog details in this moment it will be more helpful for us. this seems like ane4993e but it will be result of another error. if you got any other error messages before this send them, also you'll send tdpexchange dsierror.log.

 

[cianco]

Hi thanks for the answer.

Usually, Before this message I've other message about "protocol" like "Verb ..."

I collect the information and send you what you need.

The strange behaviour is only on one Exchange Server the other two Exchange server works fine and are very similar

.... then, I a collect the information and send you it

Thanks

bye

 

[cianco]

here you are on actlog no other messages



dsierror.log



08/03/2004 04:32:56 sessSendVerb: Error sending Verb, rc: -50

08/03/2004 04:32:56 sessSendVerb: Error sending Verb, rc: -50

08/03/2004 04:32:56 cuConfirm: Received rc: -50 trying to send Confirm verb

08/03/2004 04:32:56 sessSendVerb: Error sending Verb, rc: -50

08/03/2004 09:59:59 sessSendVerb: Error sending Verb, rc: -50

08/03/2004 09:59:59 sessSendVerb: Error sending Verb, rc: -50

08/03/2004 10:59:02 sessSendVerb: Error sending Verb, rc: -50

08/03/2004 10:59:02 sessSendVerb: Error sending Verb, rc: -50

08/04/2004 10:18:34 sessSendVerb: Error sending Verb, rc: -50

08/04/2004 10:18:34 sessSendVerb: Error sending Verb, rc: -50

08/04/2004 10:18:34 cuConfirm: Received rc: -50 trying to send Confirm verb

08/04/2004 10:18:34 sessSendVerb: Error sending Verb, rc: -50

08/04/2004 10:18:39 TcpOpen: TCP/IP error connecting to server.

08/04/2004 10:18:39 sessOpen: Failure in communications open call. rc: -50

08/04/2004 10:18:45 TcpOpen: TCP/IP error connecting to server.

08/04/2004 10:18:45 sessOpen: Failure in communications open call. rc: -50

08/04/2004 10:18:50 TcpOpen: TCP/IP error connecting to server.

08/04/2004 10:18:50 sessOpen: Failure in communications open call. rc: -50

08/04/2004 10:18:56 TcpOpen: TCP/IP error connecting to server.

08/04/2004 10:18:56 sessOpen: Failure in communications open call. rc: -50









output tdpexcc



08/04/2004 09:12:14 Backup of storage group SG1 failed.

08/04/2004 09:12:14 ANS0342E (RC236) The CRC received from the Server does not match the CRC calculated by the client.

08/04/2004 09:12:14 Retrying failed backups...

08/04/2004 10:18:39 Backup of storage group SG1 failed.

08/04/2004 10:18:39 ANS1017E (RC-50) Session rejected: TCP/IP connection failure

08/04/2004 10:18:50 Retrying failed backups...

08/04/2004 10:18:56 Total storage groups requested for backup: 2

08/04/2004 10:18:56 Total storage groups backed up: 1

08/04/2004 10:18:56 Total storage groups expired: 0

08/04/2004 10:18:56 Total storage groups excluded: 0

08/04/2004 10:18:56 Throughput rate: 4,159.20 Kb/Sec

08/04/2004 10:18:56 Total bytes transferred: 158,790,233,694

08/04/2004 10:18:56 Elapsed processing time: 37,283.28 Secs

 

[nezih]

update destination storage pool with "CRCDATA=NO" value and try again.

 

[nezih]

and this...

update node nodename validateprotocol=no

 

[cianco]

first thanks a lot.

I set validate protocol=yes because i had error like

ANR0444W Protocol error on session 718 for node node1 (TDP MSExchg) - out-of-sequence verb (type ArchRtrv1) received. (SESSION: 718)

To avoid this I set validate protocol=yes

The crc data parameter is =no

Now, You suggest validate protocol=no ... I'll try ...other helps?

Thanks a lot