1. Please help support our sponsors by considering their products and services.
    Our sponsors enable us to maintain high-speed Internet connection and fast webservers.
    They support this free information and knowledge exchange forum service at no cost to you.

    Please welcome our latest sponsor Tectrade . We can show our appreciation by learning more about Tectrade Solutions

TCP/IP communication failure

Discussion in 'Networking' started by gardenia, Dec 5, 2008.

  1. gardenia

    gardenia Active Newcomer

    Joined:
    Oct 25, 2007
    Messages:
    150
    Likes Received:
    1
    Occupation:
    Technical Specialist
    Location:
    Chennai,India
    Hi all,

    I installed TSM Server 5.4 and got configured.Then I tried to installed TSM Client 5.4 .while configuring I gave the correct Node name(TSM Client 1) ,Server address(x.x.x.x) and tcp port(1500) but it displays the error as

    "ANS5216E Could not establish a TCP/IP connection with address 'x.x.x.x'. The TCP/IP error is 'Unknown error' (errno = 10061). "

    " ANS4039E Could not establish a session with a TSM server or client agent. The TSM return code is -50. "

    "Data was written to the options file, however there was at least one error that must be fixed before we can connect to a server."


    I tried with some other port number too like (1501,1502) but its helpless.I'm getting the same error.

    Help me out to solve this issue.
     
  2.  
  3. inestler

    inestler ADSM.ORG Senior Member

    Joined:
    Mar 12, 2007
    Messages:
    152
    Likes Received:
    7
    Location:
    europe
    which port does the tsm-server use? default is 1500
    try to check if it is respond on this port. is the server up?
     
  4. mallirajan

    mallirajan Active Newcomer

    Joined:
    Nov 11, 2007
    Messages:
    75
    Likes Received:
    0
    Occupation:
    TSM Admin
    Location:
    Bengaluru
    hi

    Ping the server ip from client and client ip from the server. Check the status in that. If it is fine then go to etc\host and give the machinename and ip in both the server and client

    register node in the server 1st then do the steps in client side

    try and let me know the status
     
  5. madunix

    madunix ADSM.ORG Member

    Joined:
    Aug 5, 2008
    Messages:
    91
    Likes Received:
    1
    performe TCP connectivity testing, and check firewalls
     
  6. rajct83@gmail.com

    [email protected] ADSM.ORG Member

    Joined:
    Feb 22, 2008
    Messages:
    38
    Likes Received:
    0
    Occupation:
    Operations Lead(TSM)
    Location:
    Mumbai
    I guess the client is not registered in the Server.....
     

Share This Page