Tapes are not dismounting

[nikhil_1707]

The drive is in dismount the tape after giving
dismount vol 103668

And still it is idle state, it is a library client and mount retention is set to 1 minute

ANR8329I ECARTRIDGE volume 103668 is mounted R/W in drive DR_0_1_1_03 (mt8.0.0.2), status: IDLE.
ANR8379I Mount point in device class T1B is waiting for the volume mount to complete, status: WAITING FOR VOLUME.
ANR8329I ECARTRIDGE volume 117281 is mounted R/W in drive DR_0_1_1_02 (mt6.0.0.2), status: IDLE.
ANR8329I ECARTRIDGE volume 103716 is mounted R/W in drive DR_0_1_1_01 (mt7.0.0.2), status: IDLE.

Please help in this

 

[moon-buddy]

Have you tried the "dismount" from the Library Manager?

 

[nikhil_1707]

Yes i tried but it is telling that drive is in use from library client

 

[nikhil_1707]

But on library client it is showing as idle

 

[Trident]

What does your devcl say. q devcl [tapedevcl] f=d

Mountre is the value your host will hold the tape mounted.

 

[nikhil_1707]

I got it the port on of server was not correct on library manager it was 1650 and it should be 1602

updated the server by giving the correct lla address and now the tapes are dismounting