My server has 5 removable drives. I have each drive divided into 5 volumes of 20GB each for my primary storage pool. In order to test my ability to recover from a drive failure, I pulled one of the drives out. I varied it offline, updated all the volumes on it to "destroyed", and then put a new NTFS-formatted drive in its place.
When I try to restore the volumes from my copypool, here is the response I get:
ANR1256W Volume H:\VOLUMES\DATA1.DSM contains files that could not be restored.
I have told it to use the correct copy pool, and it grabs the tape it needs. Once it starts to try the copy from the tape, it sets all of the other storage pool volumes to read-only access.
What am I missing?
When I try to restore the volumes from my copypool, here is the response I get:
ANR1256W Volume H:\VOLUMES\DATA1.DSM contains files that could not be restored.
I have told it to use the correct copy pool, and it grabs the tape it needs. Once it starts to try the copy from the tape, it sets all of the other storage pool volumes to read-only access.
What am I missing?