Hi all,
I am doing some DR testing on a 4 way 2GB RAM NT4 Server Enterprise Edition SP6a machine using TSM client v5.1.6.7. I go through the the restore process (from bare metal) and everything is fine until my last reboot. At this point just before the login prompt (but after the GUI starts) the box blue screens with the following info:
**STOP: 0x0000001E (0xC0000005, 0xF156A88D, 0x00000000, 0x00000004)
KMODE_EXCEPTION_NOT_HANDLED Address f156a88d has base at f153a000 - win32k.sys
...
I am restoring to the exact same machine that was backed-up (I have a mirrored disk as backup to this that I removed prior to I can recovery in the time it takes to do a reboot) so hardware issues should be eliminated. I have done this twice with the same result.
Any ideas? We are pretty much stumped here.
Thanks,
Mark
I am doing some DR testing on a 4 way 2GB RAM NT4 Server Enterprise Edition SP6a machine using TSM client v5.1.6.7. I go through the the restore process (from bare metal) and everything is fine until my last reboot. At this point just before the login prompt (but after the GUI starts) the box blue screens with the following info:
**STOP: 0x0000001E (0xC0000005, 0xF156A88D, 0x00000000, 0x00000004)
KMODE_EXCEPTION_NOT_HANDLED Address f156a88d has base at f153a000 - win32k.sys
...
I am restoring to the exact same machine that was backed-up (I have a mirrored disk as backup to this that I removed prior to I can recovery in the time it takes to do a reboot) so hardware issues should be eliminated. I have done this twice with the same result.
Any ideas? We are pretty much stumped here.
Thanks,
Mark