• Please help support our sponsors by considering their products and services.
    Our sponsors enable us to serve you with this high-speed Internet connection and fast webservers you are currently using at ADSM.ORG.
    They support this free flow of information and knowledge exchange service at no cost to you.

    Please welcome our latest sponsor Tectrade . We can show our appreciation by learning more about Tectrade Solutions
  • Community Tip: Please Give Thanks to Those Sharing Their Knowledge.

    If you receive helpful answer on this forum, please show thanks to the poster by clicking "LIKE" link for the answer that you found helpful.

  • Community Tip: Forum Rules (PLEASE CLICK HERE TO READ BEFORE POSTING)

    Click the link above to access ADSM.ORG Acceptable Use Policy and forum rules which should be observed when using this website. Violators may be banned from this website. This notice will disappear after you have made at least 3 posts.

nsrndmp_recover to EMC NAS

#1
Hello All:
Newbie here on the forum and not much of NDMP expert either.
I'm trying to restore an entire file system from tape. No online index/media info at all.
Environment: LTO5 tapes to EMC VNX NAS. Windows 2012R2, Networker 8.2.1.0.

So far I've done the following:
scanner -I \\.\Tape1
mminfo -avot --- shows the media info with the file system to be restored.
However, when I run nsrndmp_recover it just stop or hang and will remain there over night. No tape is being loaded to drive, no jukebox activity at all, nothing. Yes, the jukebox is communicating fine with the server. I can run inventory, scanner, etc and see the tapes being moved in and out of the drives one after the other.

I've gone through each tape (show Save Sets) to make sure it was successfully backed up and restorable.
But I noticed there is no tape with "haNs" flag which indicates Tape-1 of the batch. All have ciNs, and tiNs for the last of the batch.
My question is can the restore be possible even though the first tape is no way to be found? If so, can someone please point me in the right direction.
Below is the command I ran and the output... Please help.
Thanks in advance.
---------------------------
C:\>nsrndmp_recover -D5 -s networker-server -c NAS-Filer01 -S <SSID> -v off -m NAS-Filer01::/Shared02/Shared02 /root_vdm_4/Shared02

05/12/16 18:50:06.023578 mmdbd server host name: networker-server
05/12/16 18:50:06.180428 RPC Authentication: error in LookupAccountSid: No mapping between account names and security IDs was done. (Win32 error 0x534)
05/12/16 18:50:06.211709 lgto_auth: redirected to networker-server prog 390103 vers 2
05/12/16 18:50:06.227344 lgto_auth for `nsrmmdbd' succeeded
05/12/16 18:50:06.258623 Destructive Restore is specified.
05/12/16 18:50:06.258623 SSID = 2968749678, Mount point =/Shared02/Shared02, Raw device =(null)
05/12/16 18:50:06.274261 save set name: /root_vdm_4/Shared02
05/12/16 18:50:06.274261 Not a Celestra retrieval.
05/12/16 18:50:06.274261 save set name: /root_vdm_4/Shared02
05/12/16 18:50:06.305546 lgto_auth: redirected to networker-server prog 390103 vers 2
05/12/16 18:50:06.321180 lgto_auth for `nsrd' succeeded
05/12/16 18:50:06.336813 ndmp_create_connect: host(NAS-Filer01),user(ndmp),data(0000000000000000),timeout(60)
05/12/16 18:50:06.352453 socket (776) is opened for NDMP connection.
05/12/16 18:50:06.352453 ndmp_wait_connect: ndp=0000000002CEF000,timeout=60
05/12/16 18:50:06.368089 ndmp_skiprecord: 1
05/12/16 18:50:06.368089 Error in message header: No such file or directory.
05/12/16 18:50:06.368089 ndmp_skiprecord: 1
05/12/16 18:50:06.368089 dispatch NDMP_NOTIFY_CONNECTION_STATUS seqno 1
05/12/16 18:50:06.383729 ndmp_notify_connect: ndp(0000000002CEF000)
05/12/16 18:50:06.383729 Receive successful NDMP connection.
05/12/16 18:50:06.383729 ndmp_connect_open: ndp(0000000002CEF000)
05/12/16 18:50:06.399368 call NDMP_CONNECT_OPEN seqno 1
05/12/16 18:50:06.399368 ndmp_skiprecord: 0
05/12/16 18:50:06.399368 NDMP version 4 is used.
05/12/16 18:50:06.399368 ndmp_connect_auth= ndp(0000000002CEF000), host(NAS-Filer01), user (ndmp)
05/12/16 18:50:06.415003 call NDMP_CONFIG_GET_SERVER_INFO seqno 2
05/12/16 18:50:06.415003 ndmp_skiprecord: 1
05/12/16 18:50:06.415003 dispatch NDMP_LOG_MESSAGE seqno 3
05/12/16 18:50:06.430642 NDMP Service Debug: The process id for NDMP service is 0x84ff480
05/12/16 18:50:06.430642 ndmp_skiprecord: 1
05/12/16 18:50:06.430642 type supported : 1
05/12/16 18:50:06.446280 type supported : 2
05/12/16 18:50:06.446280 The NDMP user 'ndmp' has a password for host 'NAS-Filer01'.
05/12/16 18:50:06.446280 authentication method=2, host=NAS-Filer01, user=ndmp, pas=0000000002CF4E40
05/12/16 18:50:06.461917 CreateMD5Digest: ndp(0000000002CEF000)
05/12/16 18:50:06.461917 call NDMP_CONFIG_GET_AUTH_ATTR seqno 3
05/12/16 18:50:06.461917 ndmp_skiprecord: 1
05/12/16 18:50:06.477556 call NDMP_CONNECT_CLIENT_AUTH seqno 4
05/12/16 18:50:06.477556 ndmp_skiprecord: 1
05/12/16 18:50:06.477556 AUTH_MD5 connection succeeded!
05/12/16 18:50:06.493193 ndmp_connect_close
05/12/16 18:50:06.493193 call NDMP_CONNECT_CLOSE seqno 5
05/12/16 18:50:06.493193 ndmp_shutdown
42795:nsrndmp_recover: Performing recover from Non-NDMP type of device
05/12/16 18:50:06.508833 In fetchcvr_id func: fetching the details of saveset 2968749678
05/12/16 18:50:06.524474 get_vol_place:
05/12/16 18:50:06.540108 lgto_auth: redirected to networker-server prog 390103 vers 2
05/12/16 18:50:06.571390 lgto_auth for `nsrd' succeeded
05/12/16 18:50:06.587022 jukebox_device_host(), client:'', server:'', jukebox:'', device_type: ''
05/12/16 18:50:06.602657 jukebox_device_host(), no jukebox named: ''
05/12/16 18:50:06.602657 device_host(), devfull:
05/12/16 18:50:06.618295 save set name: /root_vdm_4/Shared02
05/12/16 18:50:06.633932 nsrdsa_recover started, pid 4796
05/12/16 18:50:06.633932 Reading savetime from nsrdsa_save
05/12/16 18:50:06.633932 reset the ndmp_clnt_tbl to use the ndmp_bt_clnt_tbl.
05/12/16 18:50:06.649570 task = 2
05/12/16 18:50:06.649570 The block size used as in NSR_ATTR_NDMP_BLOCK_SIZE : 61440
05/12/16 18:50:06.649570 ndmp_create_connect: host(NAS-Filer01),user(ndmp),data(0000000000CAF400),timeout(60)
05/12/16 18:50:06.665208 socket (796) is opened for NDMP connection.
05/12/16 18:50:06.680851 ndmp_wait_connect: ndp=0000000002DC0440,timeout=60
05/12/16 18:50:06.680851 ndmp_skiprecord: 1
05/12/16 18:50:06.680851 Error in message header: No such file or directory.
05/12/16 18:50:06.696488 ndmp_skiprecord: 1
05/12/16 18:50:06.696488 dispatch NDMP_NOTIFY_CONNECTION_STATUS seqno 1
05/12/16 18:50:06.712128 ndmp_notify_connect: ndp(0000000002DC0440)
05/12/16 18:50:06.712128 Receive successful NDMP connection.
05/12/16 18:50:06.727761 ndmp_connect_open: ndp(0000000002DC0440)
05/12/16 18:50:06.727761 call NDMP_CONNECT_OPEN seqno 1
05/12/16 18:50:06.727761 ndmp_skiprecord: 0
05/12/16 18:50:06.743403 NDMP version 4 is used.
05/12/16 18:50:06.743403 ndmp_connect_auth= ndp(0000000002DC0440), host(NAS-Filer01), user (ndmp)
05/12/16 18:50:06.759044 call NDMP_CONFIG_GET_SERVER_INFO seqno 2
05/12/16 18:50:06.759044 ndmp_skiprecord: 1
05/12/16 18:50:06.759044 dispatch NDMP_LOG_MESSAGE seqno 3
05/12/16 18:50:06.774679 NDMP Service Debug: The process id for NDMP service is 0x84ff480
05/12/16 18:50:06.774679 ndmp_skiprecord: 1
05/12/16 18:50:06.774679 type supported : 1
05/12/16 18:50:06.790317 type supported : 2
05/12/16 18:50:06.790317 The NDMP user 'ndmp' has a password for host 'NAS-Filer01'.
05/12/16 18:50:06.790317 authentication method=2, host=NAS-Filer01, user=ndmp, pas=0000000002DA1400
05/12/16 18:50:06.805954 CreateMD5Digest: ndp(0000000002DC0440)
05/12/16 18:50:06.805954 call NDMP_CONFIG_GET_AUTH_ATTR seqno 3
05/12/16 18:50:06.821593 ndmp_skiprecord: 1
05/12/16 18:50:06.821593 call NDMP_CONNECT_CLIENT_AUTH seqno 4
05/12/16 18:50:06.821593 ndmp_skiprecord: 1
05/12/16 18:50:06.837231 AUTH_MD5 connection succeeded!
05/12/16 18:50:06.837231 Connected to NDMP data server NAS-Filer01
05/12/16 18:50:06.852869 ndmp_negotiate_extensions(): try_bre 0, try_cae 1, try_cab 1
05/12/16 18:50:06.852869 call NDMP_CONFIG_GET_SERVER_INFO seqno 5
05/12/16 18:50:06.852869 ndmp_skiprecord: 1
05/12/16 18:50:06.868507 call NDMP_CONFIG_GET_EXT_LIST seqno 6
05/12/16 18:50:06.868507 ndmp_skiprecord: 1
05/12/16 18:50:06.884146 NDMP CAE is available
05/12/16 18:50:06.884146 call NDMP_CONFIG_SET_EXT_LIST seqno 7
05/12/16 18:50:06.884146 ndmp_skiprecord: 1
05/12/16 18:50:06.884146 NDMP data server extensions supported: cae 1, cab 0
05/12/16 18:50:06.727761 Saving ssn session 0x0000000002344A50 [0] (fd 688) to [0], ssn_max_pollfd 1
05/12/16 18:50:06.852869 RPC Authentication: error in LookupAccountSid: No mapping between account names and security IDs was done. (Win32 error 0x534)
05/12/16 18:50:06.884146 lgto_auth: redirected to networker-server prog 390103 vers 2
05/12/16 18:50:06.899788 lgto_auth for `nsrmmdbd' succeeded
05/12/16 18:50:06.899788 call NDMP_CONFIG_GET_CONNECTION_TYPE seqno 8
05/12/16 18:50:06.946698 ndmp_skiprecord: 1
05/12/16 18:50:06.946698 Data server uses IPV4 for data connection
05/12/16 18:50:06.946698 Data server uses IPV6 for data connection
 

Advertise at ADSM.ORG

If you are reading this, so are your potential customer. Advertise at ADSM.ORG right now.

UpCloud high performance VPS at $5/month

Get started with $25 in credits on Cloud Servers. You must use link below to receive the credit. Use the promo to get upto 5 month of FREE Linux VPS.

The Spectrum Protect TLA (Three-Letter Acronym): ISP or something else?

  • Every product needs a TLA, Let's call it ISP (IBM Spectrum Protect).

    Votes: 12 15.8%
  • Keep using TSM for Spectrum Protect.

    Votes: 48 63.2%
  • Let's be formal and just say Spectrum Protect

    Votes: 9 11.8%
  • Other (please comement)

    Votes: 7 9.2%

Forum statistics

Threads
31,354
Messages
133,546
Members
21,475
Latest member
sag
Top