cwilloug
ADSM.ORG Senior Member
- Joined
- Sep 13, 2006
- Messages
- 388
- Reaction score
- 11
- Points
- 0
- Location
- North Dakota
- Website
- Visit site
We have a IBM N3600, using iSCSI across a firewall for disk space. Bringing the server inside the firewall, everything works great, however, outside a firewall is causing us problems.
Logging into the windows Server 2003 iSCSI initiator with the name of the N3600 controller (DNS resolves to the external address) starts out ok. Then, either DNS (checked for the correct IP addresses internal and external) or the N3600 comes back with the internal address of the N3600 which causes the failed logon.
Any suggestions or ideas?
Tried tunnelling too,, no luck.
Logging into the windows Server 2003 iSCSI initiator with the name of the N3600 controller (DNS resolves to the external address) starts out ok. Then, either DNS (checked for the correct IP addresses internal and external) or the N3600 comes back with the internal address of the N3600 which causes the failed logon.
Any suggestions or ideas?
Tried tunnelling too,, no luck.
