totalstu
ADSM.ORG Member
Hi,
Building our new TSM environment with a Dell ML6000 Library. I cannot get tapes to checkin. Whether I run check-in via the command line or go thru the GUI and add volumes I get the same response in the console. Below is from trying via the GUI:
ANR2017I Administrator ADMIN1 issued command: LABEL LIBVOLUME ML6020
SEARCH=BULK LABELSOURCE=BARCODE OVERWRITE=NO CHECKIN=SCRATCH WAITTIME=60
ANR0984I Process 33 for LABEL LIBVOLUME started in the BACKGROUND at 08:22:20.
ANR8799I LABEL LIBVOLUME: Operation for library ML6020 started as process 33.
ANR8373I 017: Fill the bulk entry/exit port of library ML6020 with all LTO
volumes to be processed within 60 minute(s); issue 'REPLY' along with the
request ID when ready.
ANR2017I Administrator ADMIN1 issued command: REPLY 017
ANR8499I Command accepted.
ANR8386W Slot 16 of library ML6020 is inaccessible.
ANR9756I No volumes were found.
ANR8801I LABEL LIBVOLUME process 33 for library ML6020 completed; 0 volume(s)
labeled, 0 volume(s) checked-in.
ANR0985I Process 33 for LABEL LIBVOLUME running in the BACKGROUND completed
with completion state SUCCESS at 08:23:07.
Any suggestions as to what may be causing this? The Slot 16 is inaccessible reply has me concerned though not sure how to resolve that.
Thanks
Building our new TSM environment with a Dell ML6000 Library. I cannot get tapes to checkin. Whether I run check-in via the command line or go thru the GUI and add volumes I get the same response in the console. Below is from trying via the GUI:
ANR2017I Administrator ADMIN1 issued command: LABEL LIBVOLUME ML6020
SEARCH=BULK LABELSOURCE=BARCODE OVERWRITE=NO CHECKIN=SCRATCH WAITTIME=60
ANR0984I Process 33 for LABEL LIBVOLUME started in the BACKGROUND at 08:22:20.
ANR8799I LABEL LIBVOLUME: Operation for library ML6020 started as process 33.
ANR8373I 017: Fill the bulk entry/exit port of library ML6020 with all LTO
volumes to be processed within 60 minute(s); issue 'REPLY' along with the
request ID when ready.
ANR2017I Administrator ADMIN1 issued command: REPLY 017
ANR8499I Command accepted.
ANR8386W Slot 16 of library ML6020 is inaccessible.
ANR9756I No volumes were found.
ANR8801I LABEL LIBVOLUME process 33 for library ML6020 completed; 0 volume(s)
labeled, 0 volume(s) checked-in.
ANR0985I Process 33 for LABEL LIBVOLUME running in the BACKGROUND completed
with completion state SUCCESS at 08:23:07.
Any suggestions as to what may be causing this? The Slot 16 is inaccessible reply has me concerned though not sure how to resolve that.
Thanks