IBM 3576 / TS3310 operator panel locked after F/W upgrade

[ltoskipper]

Hello guys,

I’ve stuck to the following problem.
On my TS3310 with two LTO-3 FC drives the operator's panel is locked or weird. It show WORKING after init.
The Library was running perfectly. After the F/W upgrade to 605G.GS002 and proper reboot the operator panel got weird.
It shows WORKING only and I cannot access the login screen.
The Web GUI is running but there is no logical library anymore and I cannot create one because the drives are not listed!
Also in the option view/upgrade library firmware the robotic and imaging software release levels are not listed!
The line for this are missing. I can post screen shots.
My Windows Server does not show the Library in the device manager menu.
My be I should perform a factory default reset, but how, without the operator panel?
Also I've upgraded to 606G.GS001 but no change?

Please help.

Alex

 

[ltoskipper]

I've replaced the CF Card on the LCB. After the fresh upgrade of the F/W 606G.GS001 everything works fine.