Dear TSMers,
I got the issue when using new tape, my library is IBM TS3200, TSM Version 6.2. I researched in the forum, but might be this thread is difference.
I have 3 new tapes (IBM LTO5), go to http://php.kelvin.nu/software/barcode/ to create new barcode
Put 3 new tapes in library (TS3200 recognize the new barcode well, example DDLD01L5, DDLD02L5, DDLD03L5)
Then, i did label and check in tape: my procedure is:
1) Put each tape to IO slot (do with each tape)
2) checkin libvolume <LIBNAME> DDLD01L5 status=private checklabel=barcode
3) Of course, reply a request as required (reply <number>)
4) define volume <VOLNAME> DDLD01L5 access=readwrite
Successfully check in, next, query q vol, i can see that media in volume with readwrite status. But, when did a backup to tape, i got the error:
ANR8355E I/O error reading label for volume DDLD01L5 in drive BI1 (\\.\Tape2). (SESSION: 1363)
ANR8381E LTO volume DDLD01L5 could not be mounted in drive BI1 (\\.\Tape2). (SESSION: 1363).
ANR1402W Mount request denied for volume DDLD01L5 - volume unavailable. (SESSION: 1363)
ANR1410W Access mode for volume DDLD01L5 now set to "unavailable". (SESSION: 1363)
I research in the forum and gg, most answer is about label, to fix the label... If lable lead to that error, so why my check in tasks be successful?
Any ideas to point out the problem be appreciated. Thank you
Nhut
I got the issue when using new tape, my library is IBM TS3200, TSM Version 6.2. I researched in the forum, but might be this thread is difference.
I have 3 new tapes (IBM LTO5), go to http://php.kelvin.nu/software/barcode/ to create new barcode
Put 3 new tapes in library (TS3200 recognize the new barcode well, example DDLD01L5, DDLD02L5, DDLD03L5)
Then, i did label and check in tape: my procedure is:
1) Put each tape to IO slot (do with each tape)
2) checkin libvolume <LIBNAME> DDLD01L5 status=private checklabel=barcode
3) Of course, reply a request as required (reply <number>)
4) define volume <VOLNAME> DDLD01L5 access=readwrite
Successfully check in, next, query q vol, i can see that media in volume with readwrite status. But, when did a backup to tape, i got the error:
ANR8355E I/O error reading label for volume DDLD01L5 in drive BI1 (\\.\Tape2). (SESSION: 1363)
ANR8381E LTO volume DDLD01L5 could not be mounted in drive BI1 (\\.\Tape2). (SESSION: 1363).
ANR1402W Mount request denied for volume DDLD01L5 - volume unavailable. (SESSION: 1363)
ANR1410W Access mode for volume DDLD01L5 now set to "unavailable". (SESSION: 1363)
I research in the forum and gg, most answer is about label, to fix the label... If lable lead to that error, so why my check in tasks be successful?
Any ideas to point out the problem be appreciated. Thank you
Nhut