1. Forum Rules (PLEASE CLICK HERE TO READ BEFORE POSTING) Click the link to access ADSM.ORG Acceptable Use Policy and forum rules which should be observed when using this website. Violators may be banned from this website. This message will disappear after you have made at least 12 posts. Thank you for your cooperation.

How to Configure the IBM TS3200 tape library with NB 6.5

Discussion in 'Symantec NetBackup' started by Fahad Ahmed Khan, Apr 10, 2008.

  1. Fahad Ahmed Khan

    Fahad Ahmed Khan New Member

    Joined:
    Apr 10, 2008
    Messages:
    1
    Likes Received:
    0
    Hello Every one,

    I want to configure the Tape library of IBM TS3200 with Netbackup 6.5 can any one help me out, how i can configure it, if any one tell me the procedure step by step that would be nice.

    Thanks & Regards,

    Fahad Ahmed Khan
     
  2.  
  3. ahmwa

    ahmwa New Member

    Joined:
    Mar 10, 2009
    Messages:
    3
    Likes Received:
    0
    Hi Fahad,

    To start out with you can get the device drivers which is compatible with the OS.Get the OS to discover the devices, medium changer and the tape drive.
     
    Last edited: Mar 10, 2009
  4. ahmwa

    ahmwa New Member

    Joined:
    Mar 10, 2009
    Messages:
    3
    Likes Received:
    0
    Hi Fahad,

    To start out with you can get the device drivers loaded on the server to which you intend to run the backups.Is the library attached via SCSI or fibre.You would need the OS to see the medium changer and drives first before you make use of netbackup to take control of the library.

    Waseem Ahmed
     

Share This Page