I need assistance with device sharing between NetApp controllers and the TSM server.
This is the description of the setup.
ADIC Scalar library wit 4 LTO4 drives.
The library is connected to a brocade FC switch.
I have 2 NetApp controllers connected to the same switch.
The TSM server (6.2 on Windows 2003) is able to see the library and drives fine.
I loaded the IBM TSM drivers for the library.
I am able to perform local backups just fine to the drives.
Now the requirement is to be able to backup the NetApp NAS volumes using NDMP.
The requirement to use the local path and not a remote NDMP.
Hence I added the datamover and created 4 drive paths from the NetApp controller using rst0a 1a 2a 3a.
I pointed all the drives to the local library (LB2.1.0.2)
When I perform backup of a volume I get IO Errors with a message that the drive is not in a state to be used.
Please let me know if I am missing something.
Error message that I am getting is as follows:
ANR8300E I/O error on library LB2.1.0.2 (OP=8401C058, CC=207, KEY=05, ASC=21,
ASCQ=01,
SENSE= 70.00.05.00.00.00.00.0A.00.00.00.00.21.01.00.CF.00.06.,
Description=Device is not in a state capable of performing request). Refer to
the &STGM; documentation on I/O error code descriptions.
ANR8945W Scratch volume mount failed 000011.
ANR8381E NAS volume 000011 could not be mounted in drive CONT1DRIVE1 (rst1a).
ANR1404W Scratch volume mount request denied - mount failed.
ANR8300E I/O error on library LB2.1.0.2 (OP=8401C058, CC=207, KEY=05, ASC=21,
ASCQ=01,
SENSE= 70.00.05.00.00.00.00.0A.00.00.00.00.21.01.00.CF.00.06.,
Description=Device is not in a state capable of performing request). Refer to
the &STGM; documentation on I/O error code descriptions.
ANR8945W Scratch volume mount failed 000012.
ANR8381E NAS volume 000012 could not be mounted in drive CONT1DRIVE2 (rst2a).
ANR1404W Scratch volume mount request denied - mount failed.
ANR8300E I/O error on library LB2.1.0.2 (OP=8401C058, CC=207, KEY=05, ASC=21,
ASCQ=01,
SENSE= 70.00.05.00.00.00.00.0A.00.00.00.00.21.01.00.CF.00.06.,
Description=Device is not in a state capable of performing request). Refer to
the &STGM; documentation on I/O error code descriptions.
ANR8945W Scratch volume mount failed 000013.
ANR8381E NAS volume 000013 could not be mounted in drive CONT1DRIVE3 (rst3a).
ANR1404W Scratch volume mount request denied - mount failed.
ANR1096E NAS Backup process 3 terminated - storage media inaccessible.
ANR0985I Process 3 for BACKUP NAS (FULL) running in the BACKGROUND completed
with completion state FAILURE at 23:08:59.
tsm: PPE-DMA-SVR3>q drive f=d
Library Name: LB2.1.0.2
Drive Name: CONT1DRIVE1
Device Type: REMOTE
On-Line: Yes
Read Formats:
Write Formats:
Element:
Drive State: EMPTY
Volume Name:
Allocated to:
WWN:
Serial Number:
Last Update by (administrator): ADMIN1
Last Update Date/Time: 06/29/2011 23:05:41
Cleaning Frequency (Gigabytes/ASNEEDED/NONE): NONE
Library Name: LB2.1.0.2
Drive Name: CONT1DRIVE2
Device Type: REMOTE
On-Line: Yes
Read Formats:
Write Formats:
more... (<ENTER> to continue, 'C' to cancel)
Element:
Drive State: EMPTY
Volume Name:
Allocated to:
WWN:
Serial Number:
Last Update by (administrator): ADMIN1
Last Update Date/Time: 06/29/2011 23:05:40
Cleaning Frequency (Gigabytes/ASNEEDED/NONE): NONE
Library Name: LB2.1.0.2
Drive Name: CONT1DRIVE3
Device Type: REMOTE
On-Line: Yes
Read Formats:
Write Formats:
Element:
Drive State: EMPTY
Volume Name:
Allocated to:
WWN:
Serial Number:
Last Update by (administrator): ADMIN1
more... (<ENTER> to continue, 'C' to cancel)
Last Update Date/Time: 06/29/2011 23:05:34
Cleaning Frequency (Gigabytes/ASNEEDED/NONE): NONE
Library Name: LB2.1.0.2
Drive Name: CONT1DRIVE4
Device Type: REMOTE
On-Line: Yes
Read Formats:
Write Formats:
Element:
Drive State: EMPTY
Volume Name:
Allocated to:
WWN:
Serial Number:
Last Update by (administrator): ADMIN1
Last Update Date/Time: 06/29/2011 23:05:24
Cleaning Frequency (Gigabytes/ASNEEDED/NONE): NONE
Library Name: LB2.1.0.2
Drive Name: MT0.0.0.2
Device Type: LTO
On-Line: Yes
more... (<ENTER> to continue, 'C' to cancel)
Read Formats: ULTRIUM4C,ULTRIUM4,ULTRIUM3C,ULT-
RIUM3,ULTRIUM2C,ULTRIUM2
Write Formats: ULTRIUM4C,ULTRIUM4,ULTRIUM3C,ULT-
RIUM3
Element: 257
Drive State: EMPTY
Volume Name:
Allocated to:
WWN: 500308C09D04D09C
Serial Number: 1310044557
Last Update by (administrator): ADMIN1
Last Update Date/Time: 06/29/2011 21:56:43
Cleaning Frequency (Gigabytes/ASNEEDED/NONE): NONE
Library Name: LB2.1.0.2
Drive Name: MT1.0.0.2
Device Type: LTO
On-Line: Yes
Read Formats: ULTRIUM4C,ULTRIUM4,ULTRIUM3C,ULT-
RIUM3,ULTRIUM2C,ULTRIUM2
Write Formats: ULTRIUM4C,ULTRIUM4,ULTRIUM3C,ULT-
RIUM3
Element: 258
more... (<ENTER> to continue, 'C' to cancel)
Drive State: EMPTY
Volume Name:
Allocated to:
WWN: 500308C09D04D000
Serial Number: 1310044566
Last Update by (administrator): ADMIN1
Last Update Date/Time: 06/29/2011 21:56:43
Cleaning Frequency (Gigabytes/ASNEEDED/NONE): NONE
Library Name: LB2.1.0.2
Drive Name: MT2.0.0.2
Device Type: LTO
On-Line: Yes
Read Formats: ULTRIUM4C,ULTRIUM4,ULTRIUM3C,ULT-
RIUM3,ULTRIUM2C,ULTRIUM2
Write Formats: ULTRIUM4C,ULTRIUM4,ULTRIUM3C,ULT-
RIUM3
Element: 259
Drive State: EMPTY
Volume Name:
Allocated to:
WWN: 500308C09D04D004
Serial Number: 1310012198
more... (<ENTER> to continue, 'C' to cancel)
Last Update by (administrator): ADMIN1
Last Update Date/Time: 06/29/2011 21:56:43
Cleaning Frequency (Gigabytes/ASNEEDED/NONE): NONE
Library Name: LB2.1.0.2
Drive Name: MT3.0.0.2
Device Type: LTO
On-Line: Yes
Read Formats: ULTRIUM4C,ULTRIUM4,ULTRIUM3C,ULT-
RIUM3,ULTRIUM2C,ULTRIUM2
Write Formats: ULTRIUM4C,ULTRIUM4,ULTRIUM3C,ULT-
RIUM3
Element: 256
Drive State: EMPTY
Volume Name:
Allocated to:
WWN: 500308C09D04D098
Serial Number: 1310044657
Last Update by (administrator): ADMIN1
Last Update Date/Time: 06/29/2011 21:56:42
Cleaning Frequency (Gigabytes/ASNEEDED/NONE): NONE
This is the description of the setup.
ADIC Scalar library wit 4 LTO4 drives.
The library is connected to a brocade FC switch.
I have 2 NetApp controllers connected to the same switch.
The TSM server (6.2 on Windows 2003) is able to see the library and drives fine.
I loaded the IBM TSM drivers for the library.
I am able to perform local backups just fine to the drives.
Now the requirement is to be able to backup the NetApp NAS volumes using NDMP.
The requirement to use the local path and not a remote NDMP.
Hence I added the datamover and created 4 drive paths from the NetApp controller using rst0a 1a 2a 3a.
I pointed all the drives to the local library (LB2.1.0.2)
When I perform backup of a volume I get IO Errors with a message that the drive is not in a state to be used.
Please let me know if I am missing something.
Error message that I am getting is as follows:
ANR8300E I/O error on library LB2.1.0.2 (OP=8401C058, CC=207, KEY=05, ASC=21,
ASCQ=01,
SENSE= 70.00.05.00.00.00.00.0A.00.00.00.00.21.01.00.CF.00.06.,
Description=Device is not in a state capable of performing request). Refer to
the &STGM; documentation on I/O error code descriptions.
ANR8945W Scratch volume mount failed 000011.
ANR8381E NAS volume 000011 could not be mounted in drive CONT1DRIVE1 (rst1a).
ANR1404W Scratch volume mount request denied - mount failed.
ANR8300E I/O error on library LB2.1.0.2 (OP=8401C058, CC=207, KEY=05, ASC=21,
ASCQ=01,
SENSE= 70.00.05.00.00.00.00.0A.00.00.00.00.21.01.00.CF.00.06.,
Description=Device is not in a state capable of performing request). Refer to
the &STGM; documentation on I/O error code descriptions.
ANR8945W Scratch volume mount failed 000012.
ANR8381E NAS volume 000012 could not be mounted in drive CONT1DRIVE2 (rst2a).
ANR1404W Scratch volume mount request denied - mount failed.
ANR8300E I/O error on library LB2.1.0.2 (OP=8401C058, CC=207, KEY=05, ASC=21,
ASCQ=01,
SENSE= 70.00.05.00.00.00.00.0A.00.00.00.00.21.01.00.CF.00.06.,
Description=Device is not in a state capable of performing request). Refer to
the &STGM; documentation on I/O error code descriptions.
ANR8945W Scratch volume mount failed 000013.
ANR8381E NAS volume 000013 could not be mounted in drive CONT1DRIVE3 (rst3a).
ANR1404W Scratch volume mount request denied - mount failed.
ANR1096E NAS Backup process 3 terminated - storage media inaccessible.
ANR0985I Process 3 for BACKUP NAS (FULL) running in the BACKGROUND completed
with completion state FAILURE at 23:08:59.
tsm: PPE-DMA-SVR3>q drive f=d
Library Name: LB2.1.0.2
Drive Name: CONT1DRIVE1
Device Type: REMOTE
On-Line: Yes
Read Formats:
Write Formats:
Element:
Drive State: EMPTY
Volume Name:
Allocated to:
WWN:
Serial Number:
Last Update by (administrator): ADMIN1
Last Update Date/Time: 06/29/2011 23:05:41
Cleaning Frequency (Gigabytes/ASNEEDED/NONE): NONE
Library Name: LB2.1.0.2
Drive Name: CONT1DRIVE2
Device Type: REMOTE
On-Line: Yes
Read Formats:
Write Formats:
more... (<ENTER> to continue, 'C' to cancel)
Element:
Drive State: EMPTY
Volume Name:
Allocated to:
WWN:
Serial Number:
Last Update by (administrator): ADMIN1
Last Update Date/Time: 06/29/2011 23:05:40
Cleaning Frequency (Gigabytes/ASNEEDED/NONE): NONE
Library Name: LB2.1.0.2
Drive Name: CONT1DRIVE3
Device Type: REMOTE
On-Line: Yes
Read Formats:
Write Formats:
Element:
Drive State: EMPTY
Volume Name:
Allocated to:
WWN:
Serial Number:
Last Update by (administrator): ADMIN1
more... (<ENTER> to continue, 'C' to cancel)
Last Update Date/Time: 06/29/2011 23:05:34
Cleaning Frequency (Gigabytes/ASNEEDED/NONE): NONE
Library Name: LB2.1.0.2
Drive Name: CONT1DRIVE4
Device Type: REMOTE
On-Line: Yes
Read Formats:
Write Formats:
Element:
Drive State: EMPTY
Volume Name:
Allocated to:
WWN:
Serial Number:
Last Update by (administrator): ADMIN1
Last Update Date/Time: 06/29/2011 23:05:24
Cleaning Frequency (Gigabytes/ASNEEDED/NONE): NONE
Library Name: LB2.1.0.2
Drive Name: MT0.0.0.2
Device Type: LTO
On-Line: Yes
more... (<ENTER> to continue, 'C' to cancel)
Read Formats: ULTRIUM4C,ULTRIUM4,ULTRIUM3C,ULT-
RIUM3,ULTRIUM2C,ULTRIUM2
Write Formats: ULTRIUM4C,ULTRIUM4,ULTRIUM3C,ULT-
RIUM3
Element: 257
Drive State: EMPTY
Volume Name:
Allocated to:
WWN: 500308C09D04D09C
Serial Number: 1310044557
Last Update by (administrator): ADMIN1
Last Update Date/Time: 06/29/2011 21:56:43
Cleaning Frequency (Gigabytes/ASNEEDED/NONE): NONE
Library Name: LB2.1.0.2
Drive Name: MT1.0.0.2
Device Type: LTO
On-Line: Yes
Read Formats: ULTRIUM4C,ULTRIUM4,ULTRIUM3C,ULT-
RIUM3,ULTRIUM2C,ULTRIUM2
Write Formats: ULTRIUM4C,ULTRIUM4,ULTRIUM3C,ULT-
RIUM3
Element: 258
more... (<ENTER> to continue, 'C' to cancel)
Drive State: EMPTY
Volume Name:
Allocated to:
WWN: 500308C09D04D000
Serial Number: 1310044566
Last Update by (administrator): ADMIN1
Last Update Date/Time: 06/29/2011 21:56:43
Cleaning Frequency (Gigabytes/ASNEEDED/NONE): NONE
Library Name: LB2.1.0.2
Drive Name: MT2.0.0.2
Device Type: LTO
On-Line: Yes
Read Formats: ULTRIUM4C,ULTRIUM4,ULTRIUM3C,ULT-
RIUM3,ULTRIUM2C,ULTRIUM2
Write Formats: ULTRIUM4C,ULTRIUM4,ULTRIUM3C,ULT-
RIUM3
Element: 259
Drive State: EMPTY
Volume Name:
Allocated to:
WWN: 500308C09D04D004
Serial Number: 1310012198
more... (<ENTER> to continue, 'C' to cancel)
Last Update by (administrator): ADMIN1
Last Update Date/Time: 06/29/2011 21:56:43
Cleaning Frequency (Gigabytes/ASNEEDED/NONE): NONE
Library Name: LB2.1.0.2
Drive Name: MT3.0.0.2
Device Type: LTO
On-Line: Yes
Read Formats: ULTRIUM4C,ULTRIUM4,ULTRIUM3C,ULT-
RIUM3,ULTRIUM2C,ULTRIUM2
Write Formats: ULTRIUM4C,ULTRIUM4,ULTRIUM3C,ULT-
RIUM3
Element: 256
Drive State: EMPTY
Volume Name:
Allocated to:
WWN: 500308C09D04D098
Serial Number: 1310044657
Last Update by (administrator): ADMIN1
Last Update Date/Time: 06/29/2011 21:56:42
Cleaning Frequency (Gigabytes/ASNEEDED/NONE): NONE