sgabriel62
ADSM.ORG Senior Member
- Joined
- Apr 7, 2005
- Messages
- 1,356
- Reaction score
- 5
- Points
- 0
- Location
- Michigan
- Website
- www.sgsolutionsinc.com
It is not a cluster disk
-
-
Community Tip: Forum Rules (PLEASE CLICK HERE TO READ BEFORE POSTING)
Click the link above to access ADSM.ORG Acceptable Use Policy and forum rules which should be observed when using this website. Violators may be banned from this website. This notice will disappear after you have made at least 3 posts.
Drive : is not a cluster disk.
- Thread starter rpask
- Start date
Windows 2008 Cluster backups fail with ANS1151E
If your cluster runs on Windows Server 2008, then this might be the culprit. [It was for me.
]
Windows 2008 Cluster backups fail with ANS1151E - drive is not a cluster disk
http://www-01.ibm.com/support/docvi...G7&uid=swg21381342&loc=en_US&cs=UTF-8&lang=en
In a nutshell, when TSM reports that a disk is not a cluster disk, review the disk's properties in Disk Management.
1. In the bottom part of its MMC, in the left column, right-click the box that represents the disk.
2. Left-click Properties.
3. Select the Volumes tab.
4. The Partition style: field most likely has value "GUID partition Table (GPT)." You must convert it to MBR. CAUTION: You will have to reformat the disk!
If your cluster runs on Windows Server 2008, then this might be the culprit. [It was for me.
]Windows 2008 Cluster backups fail with ANS1151E - drive is not a cluster disk
http://www-01.ibm.com/support/docvi...G7&uid=swg21381342&loc=en_US&cs=UTF-8&lang=en
In a nutshell, when TSM reports that a disk is not a cluster disk, review the disk's properties in Disk Management.
1. In the bottom part of its MMC, in the left column, right-click the box that represents the disk.
2. Left-click Properties.
3. Select the Volumes tab.
4. The Partition style: field most likely has value "GUID partition Table (GPT)." You must convert it to MBR. CAUTION: You will have to reformat the disk!
Last edited:
drive not a cluster disk
We had a similar issue on windows 2003 client. In our case the cluster group name was not set HKEY_LOCAL_MACHINE\system\cuurent control set\services\TSM cluster scheduler. We set the cluster group name and the backups were successful. Hope it helps
We had a similar issue on windows 2003 client. In our case the cluster group name was not set HKEY_LOCAL_MACHINE\system\cuurent control set\services\TSM cluster scheduler. We set the cluster group name and the backups were successful. Hope it helps
