I am trying to define a path to a LTO4 tape drive
The device is an ADIC Scalar i500 with four LTO4 drives.
Every time I add a drive as nrsta device it changes it to rsta.
Following is the message on the console.
DEFINE PATH FILER08 spindrive4 SRCTYPE=DATAMOVER DESTTYPE=DRIVE LIBRARY=spinlib
DEVICE=nrst4a
ANR2017I Administrator SERVER_CONSOLE issued command: DEFINE PATH FILER08
spindrive4 SRCTYPE=DATAMOVER DESTTYPE=DRIVE LIBRARY=spinlib DEVICE=nrst4a
ANR8871I The device name nrst4a specified has been changed to rst4a.
ANR1720I A path from FILER08 to SPINLIB SPINDRIVE4 has been defined.
Could you please let me know why it is behaving this way.
I have tried TSM versions TSM 6.1.2, TSM 6.2, TSM 5.5.3
The device is an ADIC Scalar i500 with four LTO4 drives.
Every time I add a drive as nrsta device it changes it to rsta.
Following is the message on the console.
DEFINE PATH FILER08 spindrive4 SRCTYPE=DATAMOVER DESTTYPE=DRIVE LIBRARY=spinlib
DEVICE=nrst4a
ANR2017I Administrator SERVER_CONSOLE issued command: DEFINE PATH FILER08
spindrive4 SRCTYPE=DATAMOVER DESTTYPE=DRIVE LIBRARY=spinlib DEVICE=nrst4a
ANR8871I The device name nrst4a specified has been changed to rst4a.
ANR1720I A path from FILER08 to SPINLIB SPINDRIVE4 has been defined.
Could you please let me know why it is behaving this way.
I have tried TSM versions TSM 6.1.2, TSM 6.2, TSM 5.5.3
