staperidze
Newcomer
- Joined
- Jul 18, 2008
- Messages
- 3
- Reaction score
- 0
- Points
- 0
Hi, all!
I have following situation;
TSM DB crashed 07/29 at ~10AM
Last DB backup was dated 07/28 at 12:00AM
Old volumehistory:
2008/07/28 17:50:05 STGDELETE 0 0 0 LTO_DC 830N
2008/07/28 17:50:05 STGDELETE 0 0 0 LTO_DC 813N
2008/07/28 23:42:06 STGNEW 0 0 0 LTO_DC 89L3
2008/07/29 00:29:56 STGNEW 0 0 0 LTO_DC 98L3
2008/07/29 05:00:07 STGNEW 0 0 0 LTO_DC 807N
volumehistory after DB restoration
2008/07/29 10:17:38 BACKUPFULL 387 0 1 LTO_DC 98L3
2008/07/29 10:17:54 STGDELETE 0 0 0 LTO_DC 830N
2008/07/29 10:17:54 STGDELETE 0 0 0 LTO_DC 813N
TSM reused previously STGNEW'ed volume 98L3 for DB backup right after restore.
830N and 813N were STGDELETE'd both before and after DB restore, and AUDIT VOL on these volumes was successfull.
When I make AUDIT VOLUME on 89L3 or 98L3 or 807N I receive:
ANR2401E AUDIT VOLUME: Volume 89L3 is not defined in a storage pool.
ANS8001I Return code 11.
QUERY VOL doesn't show 89L3, but QUERY LIBVOL does show it in list.
During AUDIT LIBRARY process TSM tried to use 807N for backup client files, but failed with TAPE RETENTION wait timeout because of AUDIT library.
I haven't my last backup of clients files and I think it placed on 89L3 or 89L3 or 807N.
QUERY CONTENT 89L3 shows error mentioned above:
ANR2401E AUDIT VOLUME: Volume 89L3 is not defined in a storage pool.
ANS8001I Return code 11.
I already tried to make checkout/checkin tape, but nothing helps.
What can be done with it?
I have following situation;
TSM DB crashed 07/29 at ~10AM
Last DB backup was dated 07/28 at 12:00AM
Old volumehistory:
2008/07/28 17:50:05 STGDELETE 0 0 0 LTO_DC 830N
2008/07/28 17:50:05 STGDELETE 0 0 0 LTO_DC 813N
2008/07/28 23:42:06 STGNEW 0 0 0 LTO_DC 89L3
2008/07/29 00:29:56 STGNEW 0 0 0 LTO_DC 98L3
2008/07/29 05:00:07 STGNEW 0 0 0 LTO_DC 807N
volumehistory after DB restoration
2008/07/29 10:17:38 BACKUPFULL 387 0 1 LTO_DC 98L3
2008/07/29 10:17:54 STGDELETE 0 0 0 LTO_DC 830N
2008/07/29 10:17:54 STGDELETE 0 0 0 LTO_DC 813N
TSM reused previously STGNEW'ed volume 98L3 for DB backup right after restore.
830N and 813N were STGDELETE'd both before and after DB restore, and AUDIT VOL on these volumes was successfull.
When I make AUDIT VOLUME on 89L3 or 98L3 or 807N I receive:
ANR2401E AUDIT VOLUME: Volume 89L3 is not defined in a storage pool.
ANS8001I Return code 11.
QUERY VOL doesn't show 89L3, but QUERY LIBVOL does show it in list.
During AUDIT LIBRARY process TSM tried to use 807N for backup client files, but failed with TAPE RETENTION wait timeout because of AUDIT library.
I haven't my last backup of clients files and I think it placed on 89L3 or 89L3 or 807N.
QUERY CONTENT 89L3 shows error mentioned above:
ANR2401E AUDIT VOLUME: Volume 89L3 is not defined in a storage pool.
ANS8001I Return code 11.
I already tried to make checkout/checkin tape, but nothing helps.
What can be done with it?