I'm backing up multiple Exchange 2010 servers with Data Protection for Microsoft Exchange Server, using VSS.
After a bit of fiddeling I have no problem setting this up.
However one of my servers have a special network configuration:
exch01.temp.com
IP 10.0.0.11
Netmask /24
GW 10.0.0.1
I dont want the backup traffic to congest the network, so I have set a local route to the backup network:
C:>route print
Persistent Routes:
Network Address....Netmask...............Gateway Address....Metric
10.1.1.0...............255.255.255.240....10.0.0.254............1.......
exch01.temp.com is given a external IP in the backup network. 10.5.5.21.
The problem arises when the TDP-node(target node) tries to contact the local DSMAGENT(Agent node) through CAD.
I'm getting this error message:
ACN0520E Failed to connect to Local DSMAGENT Node 'TEMP-EXCH01' at addressort '10.5.5.21:1581'.
Verify that the TSM Client Acceptor Daemon (CAD) is installed, configured, and running properly.
Does anybody know if it is posible to force the TDP-node(target node) to contact the local DSMAGENT(Agent node) on a spesific IP?
Where does it get this info in the first place? It seems it must be from the backup-server since it is the only server that is aware of the backup-network.
I am not able to find much documentation on CAD, so any contribution is welcomed.
After a bit of fiddeling I have no problem setting this up.
However one of my servers have a special network configuration:
exch01.temp.com
IP 10.0.0.11
Netmask /24
GW 10.0.0.1
I dont want the backup traffic to congest the network, so I have set a local route to the backup network:
C:>route print
Persistent Routes:
Network Address....Netmask...............Gateway Address....Metric
10.1.1.0...............255.255.255.240....10.0.0.254............1.......
exch01.temp.com is given a external IP in the backup network. 10.5.5.21.
The problem arises when the TDP-node(target node) tries to contact the local DSMAGENT(Agent node) through CAD.
I'm getting this error message:
ACN0520E Failed to connect to Local DSMAGENT Node 'TEMP-EXCH01' at addressort '10.5.5.21:1581'.
Verify that the TSM Client Acceptor Daemon (CAD) is installed, configured, and running properly.
Does anybody know if it is posible to force the TDP-node(target node) to contact the local DSMAGENT(Agent node) on a spesific IP?
Where does it get this info in the first place? It seems it must be from the backup-server since it is the only server that is aware of the backup-network.
I am not able to find much documentation on CAD, so any contribution is welcomed.