ANS1026E v.6.1.3.3 (Windows)

[flex]

We got this error:

ANS1026E The session is rejected: There was a communications protocol error.

What to check?

 

[chad_small]

I usually try to ftp to the TSM server from the client and if I can then its either a port issue or typo error. Is the client connecting through a firewall? Is the port blocked or possibly in use by another app? Are you sure the dsm.opt settings are correct?

 

[flex]

Hello Chad,

Nice to hear from you!

We (the client) faced this problem since they use HSM. (They also have another HSM related problem... (http://adsm.org/forum/showthread.php?t=21741) :-( As I know this is the only thing that changed.
I have an open PMR at IBM, but I thought I would check this forum to see if somebody else faced the same problem.
Thanks,

 

[chad_small]

That issue with the locked files was fixed with the following APAR.

http://www-01.ibm.com/support/docview.wss?uid=swg1IC56269

I figure you resolved that??? As for the communication error...

 

[flex]

http://adsm.org/forum/showthread.php?p=89471#post89471

SKIPMIGRATE YES also solved this.