kreucher
Newcomer
- Joined
- Dec 4, 2009
- Messages
- 4
- Reaction score
- 0
- Points
- 0
Hi Folks,
I have an issue that seems similar to IC63392, but I am not using dedup (plus I am already past the fixpack where this was fixed)...
http://www-01.ibm.com/support/docview.wss?uid=swg1IC63392
When trying to reclaim stgpool or move data, I get this dump:
I am using TSM Server 6.1.3.4 on Linux 64-bit. The affected storage pool is a tape pool, and the exact volume in question is a tape that is marked "Full" but with 0.0 "Pct Util". However, looking at its contents, it still has files on it! I also did an audit on the volume and it finished with SUCCESS (4401 items).
The volume was at ~40% Pct Util when I first started to reclaim it, but now it's stuck in this odd state, giving the error above when I try and force it to finish reclaiming.
Does anyone have suggestions?
Thanks!
- nick
I have an issue that seems similar to IC63392, but I am not using dedup (plus I am already past the fixpack where this was fixed)...
http://www-01.ibm.com/support/docview.wss?uid=swg1IC63392
When trying to reclaim stgpool or move data, I get this dump:
Code:
ANR9999D_3665097042 GetSegmentInformation(bfcreate.c:5856)
Thread<37414>: Error 1 obtaining attributes of bitfile 0
(SESSION: 12652, PROCESS: 999)
ANR9999D Thread<37414> issued message 9999 from: (SESSION:
12652, PROCESS: 999)
ANR9999D Thread<37414> 0x0000000000c0f622
OutDiagToCons+0x0x142 (SESSION: 12652, PROCESS: 999)
ANR9999D Thread<37414> 0x0000000000c12104
outDiagfExt+0x0x194 (SESSION: 12652, PROCESS: 999)
ANR9999D Thread<37414> 0x00000000005e6f89
GetSegmentInformation+0x0x249 (SESSION: 12652, PROCESS:
999)
ANR9999D Thread<37414> 0x00000000005e966e
BfReconstruct+0x0x24be (SESSION: 12652, PROCESS: 999)
ANR9999D Thread<37414> 0x0000000000696b72
MoveBatch+0x0x1a32 (SESSION: 12652, PROCESS: 999)
ANR9999D Thread<37414> 0x0000000000699128
MoveGroup+0x0x14c8 (SESSION: 12652, PROCESS: 999)
ANR9999D Thread<37414> 0x000000000069a42d
AfMoveVolume+0x0x100d (SESSION: 12652, PROCESS: 999)
ANR9999D Thread<37414> 0x00000000006a1d31
AfRclmOnsiteVols+0x0x6d1 (SESSION: 12652, PROCESS: 999)
ANR9999D Thread<37414> 0x00000000006a2bf4
AfRclmVolumeThread+0x0x3d4 (SESSION: 12652, PROCESS:
999)
ANR9999D Thread<37414> 0x0000000000c807f4
StartThread+0x0x84 (SESSION: 12652, PROCESS: 999)
ANR9999D Thread<37414> 0x0000003774a06a3a *UNKNOWN*
(SESSION: 12652, PROCESS: 999)
ANR9999D Thread<37414> 0x0000003773ede62d *UNKNOWN*
(SESSION: 12652, PROCESS: 999)
The volume was at ~40% Pct Util when I first started to reclaim it, but now it's stuck in this odd state, giving the error above when I try and force it to finish reclaiming.
Does anyone have suggestions?
Thanks!
- nick