I am unable to write to tape via TSM, but I can successfully read/write to tape using the same drive via tapeutil and tar. This is a new install of TSM and tape library/drive.
Here is the error in TSM ACT Log:
10/11/07 19:41:50 ANR8302E I/O error on drive DRV01 (/dev/rmt0) with volume
A00000L3 (OP=WRITE, Error Number=5, CC=0, KEY=0B, ASC=4B,
more... (<ENTER> to continue, 'C' to cancel)
ASCQ=00, SENSE=70.00.0B.00.00.00.00.58.00.00.00.00.4B.00-
.30.00.14.37.00.80.00.01.41.30.30.30.30.30.4C.00.00.00.0-
0.00.04.00.00.00.00.04.81.0A.30.00.00.00.00.00.05.00.00.-
00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00-
.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.37.33.5-
0.35.00.00.00.00.00.00, Description=An undetermined error
has occurred). Refer to Appendix C in the 'Messages'
manual for recommended action. (SESSION: 16, PROCESS: 4)
10/11/07 19:41:50 ANR1411W Access mode for volume A00000L3 now set to
"read-only" due to write error. (SESSION: 16, PROCESS: 4)
Here is the error in AIX errpt:
LABEL: TAPE_ERR2
IDENTIFIER: 476B351D
Date/Time: Thu Oct 11 19:42:02 PDT 2007
Sequence Number: 460
Machine Id: 00C14E604C00
Node Id: SJSVR01
Class: H
Type: PERM
Resource Name: rmt0
Resource Class: tape
Resource Type: 3580
Location: U788C.001.AAB3388-P1-T10-L4-L0
VPD:
Manufacturer................IBM
Machine Type and Model......ULT3580-TD3
Serial Number...............1210304654
Device Specific.(FW)........73P5
Description
TAPE DRIVE FAILURE
Probable Causes
TAPE DRIVE
Failure Causes
TAPE
TAPE DRIVE
Recommended Actions
PERFORM PROBLEM DETERMINATION PROCEDURES
Detail Data
SENSE DATA
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
Duplicates
Number of duplicates
Here are my defined drives/librarys and paths in my dev.config:
DEFINE LIBRARY SJLIB LIBTYPE=SCSI SERIAL="00L2U78C8330_LL0" SHARED=NO AUTOLABEL=
YES RESETDRIVE=NO
DEFINE DRIVE SJLIB DRV01 ELEMENT=256 ONLINE=Yes SERIAL="1210304654"
DEFINE PATH TSM SJLIB SRCTYPE=SERVER DESTTYPE=LIBRARY DEVICE=/dev/smc0 ONLINE=YE
S
DEFINE PATH TSM DRV01 SRCTYPE=SERVER DESTTYPE=DRIVE LIBRARY=SJLIB DEVICE=/dev/rm
t0 ONLINE=YES
I've removed the paths and drives several times with no luck. One thing I noticed was that I can't see the WWN in the dev.config or using lsattr -El rmt0. Could that have anything to do with it?
Help!!! Thanks.
Here is the error in TSM ACT Log:
10/11/07 19:41:50 ANR8302E I/O error on drive DRV01 (/dev/rmt0) with volume
A00000L3 (OP=WRITE, Error Number=5, CC=0, KEY=0B, ASC=4B,
more... (<ENTER> to continue, 'C' to cancel)
ASCQ=00, SENSE=70.00.0B.00.00.00.00.58.00.00.00.00.4B.00-
.30.00.14.37.00.80.00.01.41.30.30.30.30.30.4C.00.00.00.0-
0.00.04.00.00.00.00.04.81.0A.30.00.00.00.00.00.05.00.00.-
00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00-
.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.37.33.5-
0.35.00.00.00.00.00.00, Description=An undetermined error
has occurred). Refer to Appendix C in the 'Messages'
manual for recommended action. (SESSION: 16, PROCESS: 4)
10/11/07 19:41:50 ANR1411W Access mode for volume A00000L3 now set to
"read-only" due to write error. (SESSION: 16, PROCESS: 4)
Here is the error in AIX errpt:
LABEL: TAPE_ERR2
IDENTIFIER: 476B351D
Date/Time: Thu Oct 11 19:42:02 PDT 2007
Sequence Number: 460
Machine Id: 00C14E604C00
Node Id: SJSVR01
Class: H
Type: PERM
Resource Name: rmt0
Resource Class: tape
Resource Type: 3580
Location: U788C.001.AAB3388-P1-T10-L4-L0
VPD:
Manufacturer................IBM
Machine Type and Model......ULT3580-TD3
Serial Number...............1210304654
Device Specific.(FW)........73P5
Description
TAPE DRIVE FAILURE
Probable Causes
TAPE DRIVE
Failure Causes
TAPE
TAPE DRIVE
Recommended Actions
PERFORM PROBLEM DETERMINATION PROCEDURES
Detail Data
SENSE DATA
0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
Duplicates
Number of duplicates
Here are my defined drives/librarys and paths in my dev.config:
DEFINE LIBRARY SJLIB LIBTYPE=SCSI SERIAL="00L2U78C8330_LL0" SHARED=NO AUTOLABEL=
YES RESETDRIVE=NO
DEFINE DRIVE SJLIB DRV01 ELEMENT=256 ONLINE=Yes SERIAL="1210304654"
DEFINE PATH TSM SJLIB SRCTYPE=SERVER DESTTYPE=LIBRARY DEVICE=/dev/smc0 ONLINE=YE
S
DEFINE PATH TSM DRV01 SRCTYPE=SERVER DESTTYPE=DRIVE LIBRARY=SJLIB DEVICE=/dev/rm
t0 ONLINE=YES
I've removed the paths and drives several times with no luck. One thing I noticed was that I can't see the WWN in the dev.config or using lsattr -El rmt0. Could that have anything to do with it?
Help!!! Thanks.