liyboviz
ADSM.ORG Member
Hi,
After connecting our new scalar 1000 LTO2 library, the situation is as follows:
these are the tape drives:
rmt5 Available 10-68-00-2,0 LTO Ultrium Tape Drive
rmt6 Available 10-68-00-3,0 LTO Ultrium Tape Drive
rmt7 Available 10-69-00-2,0 LTO Ultrium Tape Drive
rmt8 Available 10-69-00-3,0 LTO Ultrium Tape Drive
I managed to read/write with a simple tar commnad.
the library is defined as:
lb3 Available 10-69-00-6,0 N/A
THE PROBLEM:
when i try to define the adsm devices-->tape drives i get the error:
Method error (/etc/methods/cfgadsmdd):
0514-051 Device to be configured does not match the physical
device at the specified connection location.
cfgadsmdd[valid]: the device is NOT supported.
cfgadsmdd[inq..]: free dds.
cfgadsmdd[main ]: error inquiry or building dds, rc=51
Our server is AIX 4.3.3, TSM server 5.1.7, Atape driver 8.3.8.0
Someone can help here?
After connecting our new scalar 1000 LTO2 library, the situation is as follows:
these are the tape drives:
rmt5 Available 10-68-00-2,0 LTO Ultrium Tape Drive
rmt6 Available 10-68-00-3,0 LTO Ultrium Tape Drive
rmt7 Available 10-69-00-2,0 LTO Ultrium Tape Drive
rmt8 Available 10-69-00-3,0 LTO Ultrium Tape Drive
I managed to read/write with a simple tar commnad.
the library is defined as:
lb3 Available 10-69-00-6,0 N/A
THE PROBLEM:
when i try to define the adsm devices-->tape drives i get the error:
Method error (/etc/methods/cfgadsmdd):
0514-051 Device to be configured does not match the physical
device at the specified connection location.
cfgadsmdd[valid]: the device is NOT supported.
cfgadsmdd[inq..]: free dds.
cfgadsmdd[main ]: error inquiry or building dds, rc=51
Our server is AIX 4.3.3, TSM server 5.1.7, Atape driver 8.3.8.0
Someone can help here?