[Veritas-bu] Barcode rules
2009-04-20 15:15:34
Nardello, John wrote:
> Command to modify the barcode is below. Pretty easy to use it with a
> quick loop to set all the barcodes = media IDs.
>
> /usr/openv/volmgr/bin/vmchange -barcode $MEDIA -m $MEDIA
>
>
> - John Nardello
>
>
>
that's fine, but not what I had in mind at all.
The info in the media db is based upon the 6-characters that come from the
barcode rules in place when the tape was first introduced into NBU. So, in my
example, a tape with barcode AA1000L3 has an entry in the media db as (media
id) 1000L3. When this tape gets images written to it, the images are
associated with media id 1000L3.
I want a way to convert the media db so that the entry for 1000L3 is converted
to AA1000. Your command does not do that and I don't see a way for that to be
done using the vmchange command. AFAIK, there's no command that will change
the media id
-stuart
+----------------------------------------------------------------------
|This was sent by stu_liddle AT yahoo DOT com via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|
|
|