[Veritas-bu] Strange problem after changing storage unit.
2009-03-05 08:49:09
Netbackup 5.0MP7 running on Solaris with SL24
Guys i got a bit of weird issue i wondered if anyone could shed some
light on.
A customer is changing from an L1000 to an SL24, but wants to have the
L1000 configured also for historic restores until they expire.
In a test bed on same server hardware (e220r) i have built a fresh OS
using Sol9 09/05 (needed mpt driver for new Ultra320 HBA installed),
cabled up the SL24 with 2 x LTO3 drives in it.
- I installed NBU and patched to MP7 as the existing install is.
- Then got the catalogues over and did a bprecover -r -dpath <path to cats>
- This recovered everything including the old L1000 storage unit.
- I removed the robot and drives using tpconfig, vmadm.
- I then configured the new SL24 unit and did an inventory on which
brought in the new LTO3 tapes and put them as scratch (as by barcode
rules said to do).
- I can see all my old media in volume group --- and all my new media
in 00_000_TLD
- I have left the L1000 storage unit configured in NBU as i want to
connect it later, where i will add using correct path etc.
- I have changed policies to use the SL24 storage unit
Now the problem is when i try and run a backup it is failing with status
96 no media available. I can't understand why as i have new media in
which is scratch.
Anyone any ideas? Do i need to remove the L1000 storage unit completely?
Is something hidden somewhere i need to change?
Cheers
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Veritas-bu] Strange problem after changing storage unit.,
Dave Markham <=
|
|
|