Re: [Veritas-bu] Directing Backups to dedicated drives
2008-07-07 14:14:13
This can be done only via zoning or LUN masking.
NetBackup doesn't allow selecting particular drive paths for a storage
unit.
You can only specify the number of drives to be used for any given
server.
You can however:
1) Direct critical backups on any of the 3 storage units you can create
with your current setup.
2) Play with number of drives to be used with
a) at the policy level
b) storage unit group - will allow you to use more than one
storage unit if needed.
Cheers.
-----Original Message-----
From: NBU [mailto:netbackup-forum AT backupcentral DOT com]
Sent: Monday, July 07, 2008 4:29 AM
To: VERITAS-BU AT mailman.eng.auburn DOT edu
Subject: [Veritas-bu] Directing Backups to dedicated drives
Hi Forum,
I have a setup of netbackup 6.5.1 having 1 master server and 4 media
server with Storagetek SL500 Library having 16 drives.
1 media server is having robotic arm configured on it with 5 drives.
2 media server is having 5 drives.
3 media server is having 6 drives.
My requirement is of directing few critical backups to dedicated drives
only assigned for these backup.
Can anyone help me out in doing this in my backup environment.
+----------------------------------------------------------------------
|This was sent by qureshiumar AT rediffmail DOT com via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|
|
|