>> Also one gotcha I ran into during my first test was block size
>> differences between the LTO3 drives I use in my production facility
>> and those on the Drives provided by Sungard.  Fixed eventually with a
>> call, but was a 1 hour delay before I could get anything going.

>This is good to know. Who did you call? What was the fix? We are using the 
>default block size for our LTO-3 devices here.

I called Networker support because the message I was getting was from Networker 
and they put me in the right direction .  I use default block sizes as well and 
it came down to some subtle difference between the two vendors LTO3 hardware.  
I want to say a Driver fixed it.

--S

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER