Networker

Re: [Networker] NW 7.4 backup to SAN

2007-12-18 08:46:59
Subject: Re: [Networker] NW 7.4 backup to SAN
From: Catalin Scarlet <catalin.scarlet AT STAR-GROUP DOT RO>
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Date: Tue, 18 Dec 2007 15:34:03 +0200
First of all you can't see the tapes correctly. 6B20|Tape. You need to see the 
complet path to the drive. For Ex: \\.\TapeX
It is possible that the drivers are not correctly installed. I had the same 
problems in the past. I do recommend to upgrade your Adic i2000 to the latest 
fw version i6 and drives to 73P5 too. Please be aware if you are using IO Blade 
into Adic i2k. This must be configured too. You can check this taking a look on 
your drives if are connected to FC switch directly or not.
I do recommend to install drivers for drives from IBM (for example 
IBMTape.x86_61590.zip).


Catalin Scarlet
Senior Technical Engineer
e-mail: catalin.scarlet AT star-group DOT ro



-----Original Message-----
From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On 
Behalf Of angelohl
Sent: 17 decembrie 2007 16:48
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: [Networker] NW 7.4 backup to SAN

Not sure if there from the SAN but this is my inquiry:

C:\Documents and Settings\Administrator>inquire
[email protected]:SlimtypeDVDRW SSW-8015S HGS4|CD-ROM
[email protected]:LSI     MegaRAID 8308ELP1.03|Disk
                                           S/N: 0051f204942787610e00944a00b00506

                                           WWNN=600605B0004A94000E6187279404F251

[email protected]:  RAID   DummyDevice    0001|Unknown Device Type
[email protected]:IBM     ULTRIUM-TD3     6B20|Tape
                                           S/N: 1210307630
                                           ATNN=IBM     ULTRIUM-TD3     12103076
30
                                           WWNN=500308C09C356000
                                           WWPN=500308C09C356001
                                           PORT=00000001
[email protected]:IBM     ULTRIUM-TD3     6B20|Tape
                                           S/N: 1210307931
                                           ATNN=IBM     ULTRIUM-TD3     12103079
31
                                           WWNN=500308C09C356004
                                           WWPN=500308C09C356005
                                           PORT=00000001
[email protected]:ADIC    Scalar i500     400G|Autochanger (Jukebox), \\.\Changer0
                                           S/N: ADICA0C0187729_LLA
                                           ATNN=ADIC    A0C0187729_LLA


Now, this is my tape library I'm pretty sure - so how do I install the SAN into 
the libraries section?

+----------------------------------------------------------------------
|This was sent by angelohl AT hotmail DOT com via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER