In regard to: Re: [Networker] SAN storage node, Bruno Madeira said (at...:

>I have a customer that has a configuration with about 16 SAN Storage
>Nodes and it's +- easy to install.
>
>- One of the problems is the jbconfig, that is quite big (16 SNodes x 6
>drives + Server = 102 devices). Make a text file with all the answers to
>the questions that the jbconfig will make, after a while it will be the
>same answers;
>- We have a ADIC Scalar 100 SDLT with 6 drives and a SNC5101 (SCSI-FC);
>- Make sure that the HBA can do persistent binding (Legato wont support
>HBA's that doesn't do it), for ex. Emulex (not QLOGIC).

Bruno, can you expound on this a bit more?  I'm the NetWorker expert at
our site, but I can't say I'm a SAN expert yet.  We're looking to hook our
SCSI-based STK9710 library with SDLT drives into one of our two fabrics
using a pair of STK SN3250 FC<->SCSI routers.  For the forseeable future,
the only thing that would be in that zone would be the host's HBA
and the two SN3250s.

I had been planning on using the QLogic 2300 HBA in the Linux box that
will be our new NetWorker server.

Tim
--
Tim Mooney                              mooney AT dogbert.cc.ndsu.NoDak DOT edu
Information Technology Services         (701) 231-1076 (Voice)
Room 242-J6, IACC Building              (701) 231-8541 (Fax)
North Dakota State University, Fargo, ND 58105-5164

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=