Re: [ADSM-L] ANR8213W schedule fails client timeout
2012-06-06 13:13:45
Yes its 2008
Thanks,
Tim
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Ochs, Duane
Sent: Wednesday, 06 June, 2012 11:50 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: ANR8213W schedule fails client timeout
Is this windows 2008 ?
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Ehresman,David E.
Sent: Wednesday, June 06, 2012 9:19 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: ANR8213W schedule fails client timeout
This is a classic symptom of a firewall blocking the cad port. It works the
first time because the cad initiated the session and then the tsm server times
out the next time it reaches out to the client because the firewall is
blocking. So you have to use webports to designate what port cad is going to
use and then open that port in the fire wall which can be a enterprise firewall
or a firewall running on the client.
David Ehresman
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Tim Brown
Sent: Wednesday, June 06, 2012 9:23 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: [ADSM-L] ANR8213W schedule fails client timeout
A few clients are failing with ANR8213W Session open with
10.1.4.130 timed out
If we restart the tsm service on the client the next scheduled backup runs ok
but the next one times out. I even coded the hla and lla and set the client
option file with tcpclientaddress, still issues. Any suggestions.
Issue with 3-4 clients.
Tim Brown
|
|
|