Re: [ADSM-L] Incremental and Full VM backups - no TSM client installed
2010-08-05 11:56:50
Ray, ok sounds good!
Also, I was thinking there probably would be no harm in having the node
do VM/VCB Incremental/Full backups on the TSM server that the VCB proxy
Machine is on. But having the normal TSM Client backups continue to be
performed on the other TSM Server. I know it's probably unusual for
that to be done but shouldn't cause a issue right? Just thinking in case
someone insists for whatever reason on having TSM Client do backups as
well.
Thanks
On 8/5/2010 10:51 AM, Storer, Raymond wrote:
Tim, yes; you can use the VMware disk mount utility to mount a VMDK file to
retrieve client files from it. When you do, Windows just sees the VMDK as
another hard drive on the local system. You can then use Windows Explorer to
copy whatever you want from the VMDK.
Ray
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Timothy Hughes
Sent: Thursday, August 05, 2010 10:36 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: [ADSM-L] Incremental and Full VM backups - no TSM client installed
Ray thanks, I think you really answered it especially with the following
lines.
If file level restore is something the application/data owner for a particular
VM desires I'd strongly recommend using the TSM client inside that VM to
perform backups as you would any other physical server.
Recovering client files from a VCB backup is a pain.
We were ask to start doing Incremental/Full VM backups on a server that was
backing up on a different TSM Server than the VCB Proxy Machine.
Now normally we would just dissociate the node and it node to that TSM Server that
the VCB proxy machine is on no problem. However this node (and two nodes others) is
also on a different network tier. So unable to use the TSM client we get that tcpip
communications failure between the client and server machine message" when we
try to use the GUI wizard to continue configuring the TSM client and the following
C:\Program Files\tivoli\TSM\baclient>dsmc I Node Name: SIJ409 ANS1017E Session
rejected: TCP/IP connection failure
So when Recovering client files from a VCB without the TSM Client this tool
would be used correct?
http://downloads.vmware.com/d/details/disk_mount_utility_5_5_driver_tools/JSp=iZGR0cGJkcCo=
)
Tim
On 8/5/2010 9:15 AM, Storer, Raymond wrote:
Tim, I'm not certain what you are trying to achieve. So, I will state what I
understand you are trying to do and perhaps you can fill in my gaps of
understanding in your reply.
You have a VMware ESX host (at least one) with one or more VMs on it in which
you wish to perform Full VM backups using TSM client and VCB on a VCB Proxy
machine. So, you schedule a VCB backup of your VM(s) and VCBMOUNTER copies the
various VMDKs etc files to your VCB Proxy machine. Then, the TSM client on the
VCB Proxy machine sends those files to TSM. At a later date you discover you'd
like to restore either the entire VM or certain files within the VM. So, you
use TSM client on the VCB Proxy to retrieve the entire set of VMDK and other
files that comprise that VM and save them to your VCB Proxy machine. If you are
restoring the entire machine, you could use VMware's converter or VCBRestore to
send the restored VMDKs etc to the ESX host and you are done. (You cannot just
copy the restored files to ESX and expect them to run, they will not.) If you
are restoring a client file or multiple files in the VM, you must use a tool
(e.g. VMware's disk-mount -
http://downloads.vmware.com/d/details/disk_mount_utility_5_5_driver_tools/JSpiZGR0cGJkcCo=
) to mount the restored VMDKs on the VCB Proxy, peruse the newly mounted
drive, and copy the file(s) you want to the currently running VM.
If file level restore is something the application/data owner for a particular
VM desires I'd strongly recommend using the TSM client inside that VM to
perform backups as you would any other physical server. Recovering client files
from a VCB backup is a pain.
What am I missing, Tim?
Ray
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf
Of Timothy Hughes
Sent: Wednesday, August 04, 2010 4:56 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: [ADSM-L] Incremental and Full VM backups - no TSM client
installed
Ray Thanks,
Yes this helps, What about the "normal" TSM backup client files not
the "VM\VCB" files will this work with restoring them even though no
client is installed? (I hope this doesn't confuse you)
I may be the one who is confused I picture the vm/vcb files being separate
from the normal TSM Client Backup files.
thanks again!
On 8/4/2010 3:12 PM, Storer, Raymond wrote:
Tim, do you mean you are performing VCB backups of guest machines and you want
to restore a specific file from one of those backups? If so, you can mount the
VMDK files once you restore them to your VCB proxy computer. I don't have the
link, but you can search VMware's web site on VCB backup and restore.
I also found this new tool (which I have *no* experience with):
http://www.vmxbuilder.com/vmware-diskmount-gui/
Ray
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf
Of Timothy Hughes
Sent: Wednesday, August 04, 2010 2:30 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: [ADSM-L] Incremental and Full VM backups - no TSM client
installed
Steve thanks,
Do you know if there are any instructions/manuals on how to do this without the
Client installed?
Thanks
Tim
On 8/3/2010 3:32 PM, Schaub, Steve wrote:
No, but I'm using the Storserver for VCB Agent, which makes it pretty easy.
Steve Schaub
Systems Engineer II, Windows
BlueCross BlueShield of Tennessee
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On
Behalf Of Timothy Hughes
Sent: Tuesday, August 03, 2010 2:58 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: [ADSM-L] Incremental and Full VM backups - no TSM client
installed
Hello All,
Does anyone have any issues/problems with doing file-level restores
without the TSM Client installed?
TSM version 6.2
Thanks for any comments in advance!
-----------------------------------------------------
Please see the following link for the BlueCross BlueShield of
Tennessee E-mail disclaimer:
http://www.bcbst.com/email_disclaimer.shtm
CONFIDENTIALITY NOTICE: This email and any attachments are for the
exclusive and confidential use of the intended recipient. If you are
not the intended recipient, please do not read, distribute or take
action in reliance upon this message. If you have received this in
error, please notify us immediately by return email and promptly
delete this message and its attachments from your computer system. We
do not waive attorney-client or work product privilege by the
transmission of this message.
CONFIDENTIALITY NOTICE: This email and any attachments are for the
exclusive and confidential use of the intended recipient. If you are
not the intended recipient, please do not read, distribute or take
action in reliance upon this message. If you have received this in
error, please notify us immediately by return email and promptly
delete this message and its attachments from your computer system. We
do not waive attorney-client or work product privilege by the
transmission of this message.
CONFIDENTIALITY NOTICE: This email and any attachments are for the
exclusive and confidential use of the intended recipient. If you are not
the intended recipient, please do not read, distribute or take action in
reliance upon this message. If you have received this in error, please
notify us immediately by return email and promptly delete this message
and its attachments from your computer system. We do not waive
attorney-client or work product privilege by the transmission of this
message.
|
|
|