Re: Restore vol and Move process not working
2006-11-02 13:39:31
Bos, David Thanks,
query content 100111 copied=yes (results)
ANR2034E QUERY CONTENT: No match found using this criteria.
query content 100111 copied=no (results
Node Name Type Filespace FSID Client's Name for
File
Name
--------------- ---- ---------- ----
--------------------------------------
SPIRIT211 Bkup /u16 22 /oradata/archive/spiritp/
spiritp1_66
453_538831729.arc
The move process is skipping a damaged file on
volume 100111: Node SPIRIT211, Type Backup, File
space
/u16, File name /oradata/archive/spiritp/
spiritp1_66453
_538831729.arc.(SESSION: 72427, PROCESS:
941)
So, I gather from this I can delete (Delete vol discard=yes)?
Thanks,
Regards
Tim
David E Ehresman wrote:
And you can confirm that with:
q cont 100111 copied=no
q cont 100111 copied=yes
If the 2nd command reports any files, you still have some recovery to
do before deleting 100111.
David
"Bos, Karel" <Karel.Bos AT ATOSORIGIN DOT COM> 11/2/2006 11:28 AM >>>
Hi,
Delete vol discard=yes. If all the steps to recover this tape are
correctly followed, the only thing left on this volume should be
damaged
file(s) NOT residing in any copy stg pool.
Regards,
Karel
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf
Of
Timothy Hughes
Sent: donderdag 2 november 2006 17:16
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Restore vol and Move process not working
Hello All,
Is there anyway to remove a single damaged file on a tape volume In a
sequential access primary Storage Pool? The space reclamation and
storage backup pool Process is skipping the damaged file (s) in
question, As it should be, But the message continuously shows up in
our
TSM operational reporting.
I tried to do an Restore Volume on the tape and It ended with success
but No files were restored from the rmpool and it was marked as access
Destroyed, as it should. I then change the status back to readwrite.
There was a message that the volume contains file that could not be
restored ok I knew that. I also tried to a move process on the tape
and
it ended with a failure.
Process 91 for RESTORE VOLUME running in the BACKGROUND completed
with
completion state SUCCESS ANR1240I Restore of volumes in primary
storage
pool LT1POOL has ended.
Files Restored: 0, Bytes Restored: 0, Unreadable Files: 0, Unreadable
Bytes: 0
ANR1256W Volume 100111 contains files that could not be Restored.
ANR2017I Administrator issued command: MOVE DATA
100111 STGPOOL=LT1POOL WAIT=NO RECONSTRUCT=YES
ANR1157I Removable volume 100111 is required for move Process.
ANR0984I Process 189 for MOVE DATA started in the BACKGROUND ANR1140I
Move data process started for volume 100111
ANR1161W The move process is skipping a damaged file on Volume 100111:
Node SPIRIT200, Type Backup, File space Bkup /u12 22
/oradat/archive/spiritx/ spiritp1_66 53_538831729.arc
ANR1141I Move data process ended for volume 100111.
ANR0985I Process 189 for MOVE DATA running in the BACKGROUND completed
with completion state FAILURE
TSM 5.3.2
AIX 5.3
Thanks for any help!
|
|
|