Hello All,

Is there anyway to remove a single damaged file on a tape volume
In a sequential access primary Storage Pool?  The space reclamation
and storage backup pool Process is skipping the damaged file (s) in
question,
As it should be, But the message continuously shows up in our TSM
operational
reporting.

I tried to do an Restore Volume on the tape and It ended with success but
No files were restored from the rmpool and it was marked as access
Destroyed, as it should. I then change the status back to readwrite.
There was a message that the volume contains file that could not be
restored ok
I knew that. I also tried to a move process on the tape and it ended
with a failure.

Process 91 for RESTORE VOLUME running in the  BACKGROUND completed
with completion state SUCCESS
ANR1240I Restore of volumes in primary storage pool LT1POOL has ended.
Files Restored: 0, Bytes Restored: 0, Unreadable Files: 0, Unreadable
Bytes: 0

ANR1256W Volume 100111 contains files that could not be
Restored.
ANR2017I Administrator issued command: MOVE DATA
100111 STGPOOL=LT1POOL WAIT=NO RECONSTRUCT=YES

ANR1157I Removable volume 100111 is required for move
Process.
ANR0984I Process 189 for MOVE DATA started in the  BACKGROUND
ANR1140I Move data process started for volume 100111

ANR1161W The move process is skipping a damaged file on Volume 100111:
Node SPIRIT200, Type Backup, File space  Bkup  /u12 22
/oradat/archive/spiritx/ spiritp1_66 53_538831729.arc

ANR1141I Move data process ended for volume 100111.
ANR0985I Process 189 for MOVE DATA running in the
BACKGROUND completed with completion state FAILURE

TSM 5.3.2
AIX 5.3

Thanks for any help!