Re: MKSYSB Failure After TSM Install
2000-03-30 12:46:14
Subject: |
Re: MKSYSB Failure After TSM Install |
From: |
"Cook, Dwight E" <cookde AT BP DOT COM> |
Date: |
Thu, 30 Mar 2000 11:46:14 -0600 |
My mksysb is going to tape as we speak... (I really should have done this
sooner after installing the new TSM3.7.2)
I'm RS/6000 S70 aix 4.3 & tsm 3.7.2
Just try what everyone else has mentioned...
make sure your "r m t #" is available and that your "m t #" is just defined
use smitty & f4 key to select the output device from a list of devices...
and if r m t # doesn't show up there ? ? ?
Dwight
> ----------
> From: Joshua S. Bassi[SMTP:jbassi AT GLORYWORKS DOT COM]
> Reply To: ADSM: Dist Stor Manager
> Sent: Thursday, March 30, 2000 10:23 AM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Re: MKSYSB Failure After TSM Install
>
> > run the mksysb with TSM server software down - have you tried that?
>
> Yes, I have went as far as disabling TSM from the inittab, deleting
> the mt device and rebooting but I am still not able to perform the
> mksysb.
>
> --
> Joshua S. Bassi
> Senior Technical Consultant
> Symatrix Technology, Inc.
> jbassi AT gloryworks DOT com
>
> -----Original Message-----
> From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU]On Behalf Of
> S W Branch
> Sent: Thursday, March 30, 2000 7:47 A
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Re: MKSYSB Failure After TSM Install
>
>
> You're on the right track - the drive is in owned by TSM so AIX can't use
> it.
> I remember having this problem when we first set up ADSM ver 2. We are
> able
> to
> run run the mksysb with TSM server software down - have you tried that?
> It's
> been a long time since we played with this, but I'm guessing that to
> access
> the
> drive from AIX while TSM is up you may need to put the drive offline using
> UPDATE DRIVE ONLINE=NO then go into smit/devices/ADSM devices and remove
> the
> drive.
>
> Steve Branch
> Phillips Petroleum
> e-mail: swbranc AT ppco DOT com
>
>
>
>
>
> "Joshua S. Bassi" <jbassi AT GLORYWORKS DOT COM> on 03/30/2000 01:01:14 AM
>
> Any replies will be addressed to: "ADSM: Dist Stor Manager"
> <ADSM-L AT VM.MARIST DOT EDU>
>
>
> To: ADSM-L AT VM.MARIST DOT EDU
>
> cc:
> (bcc: S W Branch/PPCO)
>
>
>
>
>
>
>
> Subject: MKSYSB Failure After TSM Install
>
>
>
>
>
>
>
> All,
>
> I ran the command mksysb -i -X /dev/rmt0 and received
> the following messages:
>
> Creating information file (/image.data) for rootvg.....
> Creating tape boot image./dev/rmt0.1: There is a request
> to a device or address that does not exist.
> 0512-044 mksysb: Cannot access device /dev/rmt0.1.
> tctl retension failed with return code 2.
>
> The box is a 4.3.3 7248-43P with an external IBM
> 7206-005 DDS-2 4GB tape drive. And yes I have verified
> that the special files rmt0 and rmt0.1 are present
> in the dev dir.
>
> This is a brand new machine EXCEPT that it has a 3.7.2.0
> TSM server on it and I am also using the same tape drive
> for local TSM backups. So in order to use the 4mm tape
> drive I had to go into smit and define a TSM tape drive on
> top of the rmt drive. Of course I have already tried
> deleting the entire TSM drive including the special files
> to no avail. And I have even delete all the definitions
> ran cfgmgr and also rebooted, but nothing seems to allow
> me to get a good mksysb.
>
> Any ideas?
>
>
> --
> Joshua S. Bassi
> Senior Technical Consultant
> Symatrix Technology, Inc.
> jbassi AT gloryworks DOT com
>
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- MKSYSB Failure After TSM Install, Joshua S. Bassi
- Re: MKSYSB Failure After TSM Install, S W Branch
- Re: MKSYSB Failure After TSM Install, Joshua S. Bassi
- Re: MKSYSB Failure After TSM Install, Cook, Dwight E
- Re: MKSYSB Failure After TSM Install, Alessio Prodon
- Re: MKSYSB Failure After TSM Install, Scott Pond
- Re: MKSYSB Failure After TSM Install, S W Branch
- Re: MKSYSB Failure After TSM Install, Morris.Marshael
- Re: MKSYSB Failure After TSM Install,
Cook, Dwight E <=
- Re: MKSYSB Failure After TSM Install, Joshua S. Bassi
- Re: MKSYSB Failure After TSM Install, Joshua S. Bassi
- Re: MKSYSB Failure After TSM Install, Jason E. Thomas
- Re: MKSYSB Failure After TSM Install, Tony Rynan
- Re: MKSYSB Failure After TSM Install, Joshua S. Bassi
- Re: MKSYSB Failure After TSM Install, ADSM : Dist Stor Manager [mailto:ADSM-L
- Re: MKSYSB Failure After TSM Install, ADSM : Dist Stor Manager [mailto:ADSM-L
- Re: MKSYSB Failure After TSM Install, ADSM : Dist Stor Manager [mailto:ADSM-L
- Re: MKSYSB Failure After TSM Install, ADSM : Dist Stor Manager [mailto:ADSM-L
|
|
|