Thanks Tony,
I just downloaded the  3.1.0.7o  from
ftp://service.boulder.ibm.com/storage/adsm/fixtest/v3r1/netware/ and the
ARCHIVE works!!

I will still check our Netware level.

Regards,

Rene Lambelet
Nestec SA - 55, Av. Nestle - CH-1800 Vevey
Tel: ++41'21'924'35'43 / Fax: ++41'21'924'45'89
E-Mail: rene.lambelet AT nestle DOT com



> -----Original Message-----
> From: Tony Jaworski [SMTP:TONY_JAWORSKI AT PHL DOT COM]
> Sent: Tuesday, October 26, 1999 2:02 PM
> To:   ADSM-L AT VM.MARIST DOT EDU
> Subject:      Re: Novell client 3.1.0.7e goes into ABEND with archive
> command
>
> Rene,
> I would verify what patch level you have installed on your NetWare server.
> For
> NetWare 4.11, you should apply either IWSP6a (CLIB v4.11o) or NetWare
> Support
> Pack 7a (CLIB 4.11q).  If you have NetWare 3.x, apply the latest patches
> for the
> OS.  This is the run of the mill response but valid none the less.  You
> definitely want to verify your patch level first.  Also, make sure there
> are no
> memory managers loaded on this server from DOS in your boot files
> (config.sys,autoexec.bat) before SERVER.EXE loads.
>
> We are running NetWare 4.11 with both support packs mentioned above.  We
> are
> using the v3.1.0.7E client with no problems.  We do not have problems
> doing
> archives.  Our server version is 3.1.2.40  on MVS.
>
> I believe that the 3.1.0.7E client is the latest ADSM client for Novell.
>
> Let us know how you make out.
>
> Tony Jaworski
> Senior Network Engineer
> The Phoenix
>
>
>
>
>
> "Lambelet,Rene,VEVEY,FC-SIL/INF." <Rene.Lambelet AT NESTLE DOT COM> on 
> 10/26/99
> 03:24:14 AM
>
> Please respond to "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
>
>
> To:   ADSM-L AT VM.MARIST DOT EDU
> cc:    (bcc: TONY JAWORSKI/Phoenix Home Life Mutual Insurance)
> bcc:  TONY JAWORSKI/Phoenix Home Life Mutual Insurance
> Subject:  Novell client 3.1.0.7e goes into ABEND with archive command
>
>
>
>
> Hello,
>
> since we use new OS/390 server 3.1.2.40 and client 3.1.0.7e, the Archive
> command does not work any more on Netware. The archive results in a severe
> ABEND and the entire Netware server gets down.
> Command used: archive sys:\* -subdir=no -archmc=arch_he
>
> Has anyone tried to archive on Netware with the last Adsm levels? Do you
> know this problem?
>
>
> This is the error message on the Netware client:
>
> ====================================================
> SRVEVN90A:load dsmc
> Loading module DSMC.NLM
>   ADSTAR Distributed Storage Manager
>   Version 3.01g   August 1, 1999
>   (C) Copyright IBM Corporation 1990, 1997.
>
> SRVEVN90A:
> System halted Tuesday, October 26, 1999   8:41:10 am MEST
> Abend: Page Fault Processor Exception (Error code 00000000)
>     OS version: Novell NetWare 4.11  August 22, 1996
>     Running Process: DSMC.NLM        0 Process
>     Stack: 5C 64 D3 06 FD C6 D4 06 31 30 2F 32 D2 65 D3 06
>            04 00 00 00 16 C2 19 07 98 10 0B 07 66 26 0D 07
>            00 00 00 00 00 00 00 00 16 C2 19 07 00 00 00 00
>
> Additional Information:
>     The CPU encountered a problem executing code in CLIB.NLM.  The
>     problem may be in that module or in data passed to that module
>     by a process owned by DSMC.NLM.
>
> The running process will be suspended.
>
> 10-26-99   8:41:14 am:    SERVER-4.11-4631
>      WARNING! Server SRVEVN90A experienced a critical error.  The
> offending
>      process was suspended or recovered.  However, services hosted by this
>      server may have been effected.
> "
> =============================================
>
> Thanks for any input,
> Rene Lambelet
> Nestec SA - 55, Av. Nestle - CH-1800 Vevey
> Tel: ++41'21'924'35'43 / Fax: ++41'21'924'45'89
> E-Mail: rene.lambelet AT nestle DOT com