ADSM-L

Re: Novell client 3.1.0.7e goes into ABEND with archive command

1999-10-26 08:02:02
Subject: Re: Novell client 3.1.0.7e goes into ABEND with archive command
From: Tony Jaworski <TONY_JAWORSKI AT PHL DOT COM>
Date: Tue, 26 Oct 1999 08:02:02 -0400
Rene,
I would verify what patch level you have installed on your NetWare server.  For
NetWare 4.11, you should apply either IWSP6a (CLIB v4.11o) or NetWare Support
Pack 7a (CLIB 4.11q).  If you have NetWare 3.x, apply the latest patches for the
OS.  This is the run of the mill response but valid none the less.  You
definitely want to verify your patch level first.  Also, make sure there are no
memory managers loaded on this server from DOS in your boot files
(config.sys,autoexec.bat) before SERVER.EXE loads.

We are running NetWare 4.11 with both support packs mentioned above.  We are
using the v3.1.0.7E client with no problems.  We do not have problems doing
archives.  Our server version is 3.1.2.40  on MVS.

I believe that the 3.1.0.7E client is the latest ADSM client for Novell.

Let us know how you make out.

Tony Jaworski
Senior Network Engineer
The Phoenix





"Lambelet,Rene,VEVEY,FC-SIL/INF." <Rene.Lambelet AT NESTLE DOT COM> on 10/26/99
03:24:14 AM

Please respond to "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>


To:   ADSM-L AT VM.MARIST DOT EDU
cc:    (bcc: TONY JAWORSKI/Phoenix Home Life Mutual Insurance)
bcc:  TONY JAWORSKI/Phoenix Home Life Mutual Insurance
Subject:  Novell client 3.1.0.7e goes into ABEND with archive command




Hello,

since we use new OS/390 server 3.1.2.40 and client 3.1.0.7e, the Archive
command does not work any more on Netware. The archive results in a severe
ABEND and the entire Netware server gets down.
Command used: archive sys:\* -subdir=no -archmc=arch_he

Has anyone tried to archive on Netware with the last Adsm levels? Do you
know this problem?


This is the error message on the Netware client:

====================================================
SRVEVN90A:load dsmc
Loading module DSMC.NLM
  ADSTAR Distributed Storage Manager
  Version 3.01g   August 1, 1999
  (C) Copyright IBM Corporation 1990, 1997.

SRVEVN90A:
System halted Tuesday, October 26, 1999   8:41:10 am MEST
Abend: Page Fault Processor Exception (Error code 00000000)
    OS version: Novell NetWare 4.11  August 22, 1996
    Running Process: DSMC.NLM        0 Process
    Stack: 5C 64 D3 06 FD C6 D4 06 31 30 2F 32 D2 65 D3 06
           04 00 00 00 16 C2 19 07 98 10 0B 07 66 26 0D 07
           00 00 00 00 00 00 00 00 16 C2 19 07 00 00 00 00

Additional Information:
    The CPU encountered a problem executing code in CLIB.NLM.  The
    problem may be in that module or in data passed to that module
    by a process owned by DSMC.NLM.

The running process will be suspended.

10-26-99   8:41:14 am:    SERVER-4.11-4631
     WARNING! Server SRVEVN90A experienced a critical error.  The offending
     process was suspended or recovered.  However, services hosted by this
     server may have been effected.
"
=============================================

Thanks for any input,
Rene Lambelet
Nestec SA - 55, Av. Nestle - CH-1800 Vevey
Tel: ++41'21'924'35'43 / Fax: ++41'21'924'45'89
E-Mail: rene.lambelet AT nestle DOT com
<Prev in Thread] Current Thread [Next in Thread>