Thanks, this works.
Now I' m working on reduce the log to only one file and not two.

Bjorn Sandvik wrote:

> You have to format a new (extra and temporary) log file with the dsmfmt
> command.  Type:
>
>      dsmfmt -help
>
> for online help.
>
> Afterwords you could start your server with the command:
>
>      dsmserv extend log <volume_name> <size>
>
> This will hopefully give you sufficient room to clear out your situation.
> (E.g. run a database backup to clear your log if you are running in
> rollforward mode.)
>
> Remember to delete the temporary log volume afterwords.
>
> Bjørn Harald Sandvik
> Statoil
>
> To:       ADSM-L @ VM.MARIST.EDU
> cc:        (bcc: Bjørn Harald Sandvik)
> From:     pierantonio.bianchi @ JRC.IT @ INTERNET
> Date:     26.01.98 10:47:35
> Subject:  Recovery Log Full: server dosn' t start.
>
> Content-type: text/plain; charset=-ascii
>
> Hi,
> after the starting of the server with:
> dsmserv&
> I get this sequence of messages
> *********************************
> ANR7800I DSMSERV generated at 11:49:02 on Jan 19 1996.
> ADSTAR Distributed Storage Manager for AIX-RS/6000
> Version 2, Release 1, Level 5.6/5.6
> Licensed Materials - Property of IBM
> 5765-564 (C) Copyright IBM Corporation 1990, 1995. All rights reserved.
> U.S. Government Users Restricted Rights - Use, duplication or disclosure
> restricted by GSA ADP Schedule Contract with IBM Corporation.
> ANR0900I Processing options file dsmserv.opt.
> ANR0990I ADSM server restart-recovery in progress.
> ANR7821E Error reading from standard input.
> ANR0200I Recovery log assigned capacity is 16 megabytes.
> ANR0201I Database assigned capacity is 176 megabytes.
> ANR0306I Recovery log volume mount in progress.
> ANR0353I Recovery log analysis pass in progress.
> ANR0354I Recovery log redo pass in progress.
> ANR0355I Recovery log undo pass in progress.
> ANR0352I Transaction recovery complete.
> ANR9999D logseg.c(415): Log space has been overcommitted (no empty
> segment found) - base LSN =019.0.0.
> ANR7838S Server operation terminated.
> ANR7837S Internal error LOGSEG871 detected.
>   0x10041960 LogAllocSegment
>   0x1003F050 ForceLogPages
>   0x1003FE20 LogWriterThread
>   0x1000D02C *UNKNOWN*
>   0xD0652F44 _pthread_body
> *********************************
> then the server is running i.e. there is a process with such name, but I
> can' t connect to.
> Any ideas???
> TIA
> --
> Pier Antonio BIANCHI
> ADSM, System Manager
> JRC - Ispra
> Italy



--
Pier Antonio BIANCHI
Pier Antonio BIANCHI
ADSM, System Manager
JRC - Ispra
Italy