Re: Use of DLT tape libraries
1997-06-19 15:37:49
Subject: |
Re: Use of DLT tape libraries |
From: |
Mark Roberts <mkr AT OPENMIC DOT COM> |
Date: |
Thu, 19 Jun 1997 14:37:49 -0500 |
Chuck Tomlinson 793-0730 wrote:
>
> Automatic digest processor <LISTSERV AT VM.MARIST DOT EDU> writes:
> ------------------------------
> >Date: Mon, 16 Jun 1997 16:25:04 -0400
> >From: "Prather, Wanda" <PrathW1 AT CENTRAL.SSD.JHUAPL DOT EDU>
> >Subject: Re: Use of DLT tape libraries
> >
> >We are using an STK 9710 (which I think is fundamentally the same as a
> >9714) with 5 DLT drives, and it is superb.
> >So far it appears to even outperform our 9710's with 3490 drives!
> >
> >Be aware that to fully use it, you need the STK ACSLS software and the
> >Adsm Enhanced Server code.
> >(Some resellers don't make that clear when you order the box.)
> >
> >And read the instructions in the Enhanced Server README file CAREFULLY.
> >That is the information you use to configure the 9710 to ADSM.
> >
> ADSM show now have the drivers to run the 9714 & 9710 in direct attached
> mode and not have to use the ACSLS code. I ran a beta version of the drivers
> on a test 9714 and it work fine. As stated in a previous post it is
> supported
> in 2.1.X.12 version of ADSM server. You can find is listed in the file:
>
> v2r1m_f12.NEWDEVICE.SUPPORT
> | STK 9714 | DLT 4000 | 1 to 6 | 40-100 |
> | STK 9710 (SCSI Only) | DLT 4000 | 1 to 10 | 252-588 |
>
> What the ACSLS code does buy you is the ability to run more then onephysical
> ADSM server off of the tape library. If that is not a requirment then I would
> say use the new drivers.
>
> Chuck T.
> (just another ADSM user)
> ----------------------------------------------------------------
> Disclaimer: These are my views and not those of my employer.
>
> Charles (Chuck) N. Tomlinson IBM Global Services, Austin, Texas
> Phone: (512) 823-0730 Tie Line: 793-073 Storage Management Division
> http://w3.austin.ibm.com/~chuckt Email: chuckt AT austin.ibm DOT
> com
Direct attach is supported for STK 97xx libraries. Direct attach
appears to
have a few other differences than just non-support of multiple ADSM
servers.
Direct attach will not support mixed media, also loading and labeling
volumes
with direct attach is a bit more painful, IMHO. The licensing structure
is
different as well. ACSLS-attached 97XXs fall under Module 3 support;
direct-attached 97XXs fall under Module 4 support.
Mark
--
Mark Roberts Mail: mkr AT openmic DOT com
Mark Roberts Mail: mkr AT openmic DOT com
Open Microsystems Inc. WWW: http://www.openmic.com
505 E. Huntland Drive, Suite 450 Voice: (512) 450-0900 x177
Austin, TX 78752-3714 Fax: (512) 450-0397
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- Use of DLT tape libraries, Steven Bridge
- Re: Use of DLT tape libraries, Kelly J. Lipp
- Use of DLT tape libraries, Roberto Sep#lveda
- Re: Use of DLT tape libraries, Peter Thomas
- Re: Use of DLT tape libraries, Prather, Wanda
- Re: Use of DLT tape libraries, Kauffman, Tom
- Re: Use of DLT tape libraries, Chuck Tomlinson 793-0730
- Re: Use of DLT tape libraries,
Mark Roberts <=
- Use of DLT tape libraries, Steven Bridge [SMTP:ccaasub
- Use of DLT tape libraries, SMTPMAIL . ownerad at PROFGATE
|
|
|