Stacy -

Thanks for the command - It worked that way....
All my volumes are checked in and I'm ready to give my presentation in
time - Phew!!!

Thanks again..
Christo

>-----
>From:  Stacy Lacy[SMTP:Stacy_Lacy AT CARGILL DOT COM]
>Sent:  Wednesday, August 07, 1996 14:27
>To:    Multiple recipients of list ADSM-L
>Subject:       Re: Problems using 'checkin libvol' command
>
>     Try
>
>     checkin libvol storage0 status=privat search=yes devtype=3590
>
>     On version 2.1 this works, however, I am not sure if the 3590s
>were
>     supported under version 1.2 on ADSM.
>
>Stacy Lacy
>Excel Corp
>______________________________ Reply Separator
>_________________________________
>Subject: Problems using 'checkin libvol' command
>Author:  ADSM-L (ADSM-L AT VM.MARIST DOT EDU) at internet
>Date:    8/6/96 4:35 PM
>
>
>Hi everyone
>
>Our current configuration is as follows:
>A 3494 with two 3590 drives
>Data path       = SCSI
>Control path    = RS232
>Server          = Sun Sparc running Solaris 2.4
>Adsm            = Version 1.2.1
>
>I've been able to define the library and both drives to Adsm without
>any
>problems..
>When I try to do the checkin libvol command I get the following
>messages:
>q mount
>ANR2034E QUERY MOUNT: No match found for this query.
>adsm>
>q drive
>
>Library Name     Drive Name       Device Type     Device
>Element
>------------     ------------     -----------     ----------------
>-------
>STORAGE0         DRIVE1           3590            /dev/rmt/1st
>
>STORAGE0         DRIVE2           3590            /dev/rmt/2st
>
>
>adsm>
>checkin libvol storage0 status=privat search=yes
>ANR8422I CHECKIN LIBVOLUME: Operation for library STORAGE0 started as
>process
>3.
>adsm>
>ANR8447E No drives are currently available in library STORAGE0.
>ANR8431I CHECKIN LIBVOLUME process completed for library STORAGE0; 0
>volume(s)
>found
>
>The devclass has got a mountlimit of 2 and there are no tapes mounted
>on
>the drive.
>
>Is there anything we are overlooking?
>We are getting slightly desperate as we have to give a demo next
>week!!!!
>
>Thanks
>Christo
>christoh AT transnet.co DOT za
>