Hi,

If you solve this I would appreciate a note on how its done.  I have had
this problem for weeks and I am not getting very far with IBM on it ?????

Thanks,

Richard.


Hi everyone
>
>Our current configuration is as follows:
>A 3494 with two 3590 drives
>Data path       = SCSI
>Control path    = RS232
>Server          = Sun Sparc running Solaris 2.4
>Adsm            = Version 1.2.1
>
>I've been able to define the library and both drives to Adsm without any
>problems..
>When I try to do the checkin libvol command I get the following
>messages:
>q mount
>ANR2034E QUERY MOUNT: No match found for this query.
>adsm>
>q drive
>
>Library Name     Drive Name       Device Type     Device
>Element
>------------     ------------     -----------     ----------------
>-------
>STORAGE0         DRIVE1           3590            /dev/rmt/1st
>
>STORAGE0         DRIVE2           3590            /dev/rmt/2st
>
>
>adsm>
>checkin libvol storage0 status=privat search=yes
>ANR8422I CHECKIN LIBVOLUME: Operation for library STORAGE0 started as
>process
>3.
>adsm>
>ANR8447E No drives are currently available in library STORAGE0.
>ANR8431I CHECKIN LIBVOLUME process completed for library STORAGE0; 0
>volume(s)
>found
>
>The devclass has got a mountlimit of 2 and there are no tapes mounted on
>the drive.
>
>Is there anything we are overlooking?
>We are getting slightly desperate as we have to give a demo next
>week!!!!
>
>Thanks
>Christo
>christoh AT transnet.co DOT za
>
>