Are you looking for the values from all the fields in a Netview Trap?  I
wrote a netview-sniffer that will register with trapd and print to standard
out the entire trap PDU including the varbind traversal.  The code is quite
simple, all you need to code is having your application register with trapd
and receive traps.  I believe there is a good example of this in
/usr/OV/prg_samples.
 
Best of luck,
 

Jason Allison 
Principal Engineer 
ARINC Incorporated 
Office:  (410) 266-2006 
FAX:  (410) 573-3026 

 

-----Original Message-----
From: Karl Prinelle [mailto:karl.prinelle AT elyzium.co DOT uk]
Sent: Monday, January 27, 2003 9:18 AM
To: nv-l AT lists.tivoli DOT com
Subject: [nv-l] trapd tracing - trap fields?


Hi,
 
Is it possible to get trapd to generate a trace that shows the individual
fields from a trap?  I've switched tracing on, but I don't seem to get a
very good level of detail.  If there is a pdf on this can anyone point me at
it - I've not noticed it so far.
 
Reason for asking is that I'm having a doing a version of mib2tec.pl that
will do all the normal stuff (cds/baroc/oid/conf/rls etc) for a MIB
containing TRAP-TYPE's, but will also be able to do the same for unformatted
traps.  I know mi2trap will do a lot of this if I have a MIB, but I keep
finding applications that send traps & I can't locate the MIB (or there
isn't one).
 
Many thanks
 
 
Karl
 
 
 
Karl Prinelle
Tivoli Certified Consultant
Elyzium Ltd
Enterprise Systems Management Consultants
Mobile: +44 (0)7813 189198
Email:  <mailto:Karl.Prinelle AT elyzium.co DOT uk> Karl.Prinelle AT elyzium.co 
DOT uk
http://www.elyzium.co.uk <http://www.elyzium.co.uk/> 
 
  
---------------------------------------------------------------------------
Elyzium Disclaimer:

This email transmission is confidential and intended solely for the person
or organisation to whom it is addressed. If you are not the intended
recipient, you must not copy, distribute or disseminate the information, or
take any action in reliance of it. Any views expressed in this message are
those of the individual sender, except where the sender specifically states
them to be the views of any organisation or employer. If you have received
this message in error, do not open any attachment but please notify the
sender (above) deleting this message from your system. Please rely on your
own virus check no responsibility is taken by the sender for any damage
rising out of any bug or virus infection.

---------------------------------------------------------------------------

 

 


---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe AT lists.tivoli DOT com
For additional commands, e-mail: nv-l-help AT lists.tivoli DOT com

*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)