Re: [Veritas-bu] Fiber channel robot device numbers auto-incrementing
2013-03-27 15:12:17
Forgot to mention: The media server is an HP Proliant DL380p Gen8 with an HP
QLogic Fibre Channel HBA.
On Mar 27, 2013, at 12:07 PM, Neil Conner <neil AT mbari DOT org> wrote:
> Environment:
> NetBackup 7.1.0.4
> RHEL6 master and media server
> Overland Storage FC Neo 8000e tape library (tld)
> LTO5 tape drives
>
> Our new tape library has frozen a couple of times and needed to be rebooted.
> When it comes back online, the media server assigns the robot a new device
> name which means NetBackup can't talk to it any more and all the tape drives
> are down'd until the robot is reconfigured with the new device name. Major
> PTA.
>
> output from scan:
> Device Name : "/dev/sg6"
> Passthru Name: "/dev/sg6"
> Volume Header: ""
> Port: -1; Bus: -1; Target: -1; LUN: -1
> Inquiry : "OVERLANDNEO Series 0701"
> Vendor ID : "OVERLAND"
> Product ID : "NEO Series "
> Product Rev: "0701"
> WWN : ""
> WWN Id Type : 0
> Device Identifier: "OVERLANDNEO Series"
> Device Type : SDT_CHANGER
> NetBackup Robot Type: 8
>
> Prior to yesterday's reboot, the Device Name and Passthru Name were both
> "/dev/sg5", and prior to that they were both "/dev/sg4", etc.
>
> Does anyone know how to keep the device name fixed in RHEL6?
>
> Thanks,
> Neil
>
> _______________________________________________
> Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|
|
|