[Veritas-bu] Fiber channel robot device numbers auto-incrementing
2013-03-27 15:07:14
Environment:
NetBackup 7.1.0.4
RHEL6 master and media server
Overland Storage FC Neo 8000e tape library (tld)
LTO5 tape drives
Our new tape library has frozen a couple of times and needed to be rebooted.
When it comes back online, the media server assigns the robot a new device name
which means NetBackup can't talk to it any more and all the tape drives are
down'd until the robot is reconfigured with the new device name. Major PTA.
output from scan:
Device Name : "/dev/sg6"
Passthru Name: "/dev/sg6"
Volume Header: ""
Port: -1; Bus: -1; Target: -1; LUN: -1
Inquiry : "OVERLANDNEO Series 0701"
Vendor ID : "OVERLAND"
Product ID : "NEO Series "
Product Rev: "0701"
WWN : ""
WWN Id Type : 0
Device Identifier: "OVERLANDNEO Series"
Device Type : SDT_CHANGER
NetBackup Robot Type: 8
Prior to yesterday's reboot, the Device Name and Passthru Name were both
"/dev/sg5", and prior to that they were both "/dev/sg4", etc.
Does anyone know how to keep the device name fixed in RHEL6?
Thanks,
Neil
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Veritas-bu] Fiber channel robot device numbers auto-incrementing,
Neil Conner <=
|
|
|