Re: [Veritas-bu] LTO3 to LTO4 conversion
2010-05-03 17:21:26
I've heard mixed reports from people varying from "it works, but will
result in bad things" to "it will not work, period" when it comes to
mixing labels on media types. The issue we face right now is we need to
order more tape, and would rather not order LTO3 when it will just be
pitched anyways, but we don't have LTO4 labels yet. We may end up trying
to print out own if we have to.
Jeff Cleverley wrote:
> Nate,
>
> Generally people don't like mixing media levels within a pool but it
> can be done within the read/write compatibility between generations.
> You may need to keep an eye on your barcode labels and your tape
> library. Most libraries allow the barcode scanner to use the last 2
> charactors of the label such as "L4" to specify the density of the
> tapes. If this is set and you use the gen3 labels ending in "L3" it
> will write at the lower density level.
>
> I don't believe you can mix media types in a pool such as LTO and QIC.
> That may be what you were thinking of.
>
> Jeff
>
>
--
Nate Sanders Digital Motorworks
System Administrator (512) 692 - 1038
This message and any attachments are intended only for the use of the addressee
and may contain information that is privileged and confidential. If the reader
of the message is not the intended recipient or an authorized representative of
the intended recipient, you are hereby notified that any dissemination of this
communication is strictly prohibited. If you have received this communication
in error, please notify us immediately by e-mail and delete the message and any
attachments from your system.
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|
|
|