robtest works fine, I can display what is in all of the slots etc, I have
setup regular robots as well -- but this is ACSLS..
I am waiting for someone to check the library front panel to make sure the
robot is 'ready'
On Tue, 21 Nov 2006, WEAVER, Simon wrote:
>
> Justin
> I do not have that robot, but have you recycles the services again?
> Also, may be a bit drastic, but what if you remove the robot and drives and
> re-run device config wizard?
>
> Any specific errors or messages on the Robotic LCD Display? What about
> powering cycling the robot?
>
> Or ROBTEST for example? Just a thought....
>
> Sounds like a misconfigured device or scsi error possibly....
>
> Regards
>
> Simon Weaver
> 3rd Line Technical Support
> Windows Domain Administrator
>
> EADS Astrium Limited, B23AA IM (DCS)
> Anchorage Road, Portsmouth, PO3 5PU
>
> Email: Simon.Weaver at Astrium-eads.net
>
>
>
> -----Original Message-----
> From: Justin Piszcz [mailto:jpiszcz at lucidpixels.com]
> Sent: 21 November 2006 12:05
> To: veritas-bu at mailman.eng.auburn.edu
> Subject: [Veritas-bu] ACS Error: robot inventory failed: Unable toinitialize
> robot (204)
>
>
> --------------------------------------------------------------------
> 11/21/2006 03:20:15
> Robot: ACS(0) on backup.domain.com
> Operation: Inventory
> --------------------------------------------------------------------
> robot inventory failed: Unable to initialize robot (204)
>
> --------------------------------------------------------------------
>
> Anyone know why I cannot inventory the robot? Also I setup the drives per
> their acs,lsm,rail,drive configuration and they all appear as AVR.
>
> Anyone else here setup an STK8500 library with ACSLS before?
>
> Justin.
> _______________________________________________
> Veritas-bu maillist - Veritas-bu at mailman.eng.auburn.edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
>
> This email (including any attachments) may contain confidential and/or
> privileged information or information otherwise protected from disclosure. If
> you are not the intended recipient, please notify the sender immediately, do
> not copy this message or any attachments and do not use it for any purpose or
> disclose its content to any person, but delete this message and any
> attachments from your system. Astrium disclaims any and all liability if this
> email transmission was virus corrupted, altered or falsified.
> ---------------------------------------------------------------------
> Astrium Limited, Registered in England and Wales No. 2449259
> Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS,
> England
>
|