[Veritas-bu] pain in the Robtest!
2004-04-20 14:09:21
You can also echo your commands into tl8test. Here's an example...
echo "s d" | tl8test -r /dev/sg/<path to the robotic device file>
just replace your commands with the ""'s for what you want to occur
The nice thing about this is, it releases to robot back to NetBackup
control once it exits.
John
-----Original Message-----
From: veritas-bu-admin AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu]On Behalf Of Jason
Helfman
Sent: Tuesday, April 20, 2004 9:51 AM
To: veritas-bu AT mailman.eng.auburn DOT edu
Subject: [Veritas-bu] pain in the Robtest!
Hey all,
I was wondering if there is a way to script robtest to move tapes to
locations. It's quiet a pain to move 50 plus tapes into the mailslot.
Thanks,
Jason
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Veritas-bu] pain in the Robtest!, Jason Helfman
- [Veritas-bu] pain in the Robtest!, Donaldson, Mark
- [Veritas-bu] pain in the Robtest!,
Gee, John <=
- [Veritas-bu] pain in the Robtest!, William Enestvedt
- [Veritas-bu] pain in the Robtest!, Donaldson, Mark
- [Veritas-bu] pain in the Robtest!, Donaldson, Mark
- [Veritas-bu] pain in the Robtest!, William Enestvedt
- [Veritas-bu] pain in the Robtest!, Donaldson, Mark
|
|
|