Sorry for the long delay in my response, here it goes:
 
Nb is patched to 34_2
 
st.conf is correct on both solaris boxes, sgscan can see the drives as well.

 
The swithes are Mcdata 32 and 64 ports, the clients are actually hooked into
connectrix 32 port, but for the SDLT, it goes through a crossroads 3250
bridge
 
HBA: on the 2.8 box, Emulex LP800 4.2k
         on the 2.6 box, JNI:FCI-1063 2.5.9
 
 

-----Original Message-----
From: Brochart, Fabrice [mailto:BrochF AT europe.stortek DOT com]
Sent: Wednesday, February 20, 2002 4:30 AM
To: Vapiwala, Kevin V [IT]
Cc: 'veritas-bu AT mailman.eng.auburn DOT edu'
Subject: RE: [Veritas-bu] SSO problems with Solaris 2.6 and 2.8



        Hi Kevin, 

Have you installed all necessary patches from SUN&Veritas ?? 
Have you set up the solaris's st.conf file ?? 
What kind of switch do you use ?? 
What kind of HBA, firmware ?? 

Fabrice 

-----Original Message----- 
From: Vapiwala, Kevin V [IT] [ mailto:kevin.v.vapiwala AT ssmb DOT com
<mailto:kevin.v.vapiwala AT ssmb DOT com> ] 
Sent: mardi 19 février 2002 20:00 
To: 'Atif Naseem'; veritas-bu AT mailman.eng.auburn DOT edu; 
roger AT rogerpatrick DOT com 
Subject: [Veritas-bu] SSO problems with Solaris 2.6 and 2.8 


Guru's, 


I'm having trouble getting SSO backups to work on Solaris machines with 
tapes on the SAN. Here's the setup: 


One Unix Master Server, attached to STK L700 
Two Solaris media servers 2.8 and 2.6 
Win2k Media server. 

The Win2k server backups up fine he can see an SDLT drive and a 9940 on the 
SAN. The 2.6 machine sees 2 SDLT drives on the SAN. The 2.8 machine sees a 
9940 Driver on the SAN. When I try to run the backup it gets to a point 
where it tries to mount the tape and puts the tape in the drive, but after 
that , nothing. Anyone have any ideas? 

Kevin Vapiwala 

_______________________________________________ 
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu 
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
<http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu>