This is a fact. STK uses a different type of barcode than ATL, and others.
You will have to make sure you get barcodes that work for the STK. In a
disaster recovery secanrio, you might have to manually specify what tapes
are in each slot through the media manager (if you don't have readable
barcodes).
Steve Dvorak
Senior Systems Engineer
----------------------------------------------------------
VERITAS Software Corp. Phone: (602) 553-1042
2390 E. Camelback Road, Ste 300 Fax: (602) 553-1140
Phoenix, AZ 85016 Pager: (888) 264-7325
mailto:sdvorak AT veritas DOT com http://www.veritas.com
----------------------------------------------------------
-----Original Message-----
From: Andrew Shinkarev [mailto:shinkara AT pprd.abbott DOT com]
Sent: Monday, February 05, 2001 2:15 PM
To: veritas-bu AT mailman.eng.auburn DOT edu
Subject: Re: [Veritas-bu] changing tape libraries at hot site
On Mon, Feb 05, 2001 at 01:34:34PM -0500, Dennis Dwyer wrote:
We had problems of using barcodes on STK L700, which perfectly
were running on ATL robots. Sometimes STK failed to read the
barcodes.
I think the problem is STK uses digital camera intead of barcode
reader as ATL does.
> David,
>
> I thought I saw an issue on this site a couple of weeks ago involving the
barcodes on STK libraries versus non-STK libraries. Any issues you can think
of regarding that?
>
> Regards,
> Dennis
>
> Quote: "Time is not a test of the truth"
> Translation: Just because you've always done it that way, doesn't make it
right
>
> Dennis F. Dwyer
> Enterprise Storage Manager
> Tampa Electric Company
>
> (813) 225-5181 - Voice
> (813) 275-3599 - FAX
>
> Visit our corporate website at www.tecoenergy.com
>
> >>> "David A. Chapa" <david AT datastaff DOT com> 02/05/01 01:23PM >>>
> Shouldn't be a problem. I can't think of any show
> stoppers.
>
> You'll just want to make sure that you have your robot
> configured properly at the hot site (robnum, devfile,
> etc.)
>
> Perhaps one of the things that I would do after you
> recover the databases at your hot site would be to move
> all of the tapes to NON-ROBOTIC or STANDALONE then Auto-
> Inventory the library.
>
> other than that I think you should be okay.
>
> David
>
> Quoting Daniel Monjar <dam AT orgtek DOT com>:
>
> > what would be involved with changing tape libraries
> at a disaster
> > recovery test? Say I'm using a Quantum/ATL robot
> here and have to use
> > a Storage-Tek robot there. Is this a large problem?
> >
> > --
> > Daniel Monjar (mailto:dmonjar AT orgtek DOT com)
> > "Never underestimate the power of stupid people in
> large groups."
> >
> > _______________________________________________
> > Veritas-bu maillist - Veritas-
> bu AT mailman.eng.auburn DOT edu
> >
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-
> bu
> >
>
>
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> David A. Chapa
> Consulting Manager
> DataStaff, Inc.
> 847 413 1144
> _______________________________________________
> Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
>
> _______________________________________________
> Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
--
----
Andrew Shinkarev
Network Systems Specialist
Abbott Laboratories
(847) 9387559
shinkara AT pprd.abbott DOT com
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|