Ah ok, there goes most of my theories... Now we're back to looking at
your device config then.... Can you run:

 inquire -v 

If /dev/rmt1.1 and /dev/rmt/2.1 do point at the same drive the you
should see in the inquire output that they show the same S/N  (serial
number of the drive hardware).


> -----Original Message-----
> From: EMC NetWorker discussion 
> [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On Behalf Of ramo
> Sent: Monday, 2 June 2008 6:39 PM
> To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
> Subject: [Networker] The volid on tape and the one in media 
> base is not the same!
> 
> version: NetWorker 7.2.2 Build 494 Network Edition/10
> My tapes are all: IMATION Black Watch ULTRIUM (400GB/200GB)
> 
> I have tested the devices with the mt command; the only 
> difference between themes is:
> /dev/rmt1.1
> lun_id         0x1000000000000    Logical Unit Number ID      
>               False
> /dev/rmt2.1
> lun_id         0x2000000000000    Logical Unit Number ID      
>               False
> 
> with the same :
> FC node
> node_name      0x100000e00203649f FC Node Name                
>               False
> 
> and SCSI ID !!!
> scsi_id        0x10200            SCSI ID                     
>               False
> 
> Is the fact that they have the same SCSI ID is correct ?!
> how to get persistent binding set in the OS for tape devices ?.
> 
> +-------------------------------------------------------------
> ---------
> |This was sent by bob_omar_31 AT yahoo DOT com via Backup Central.
> |Forward SPAM to abuse AT backupcentral DOT com.
> +-------------------------------------------------------------
> ---------
> 
> To sign off this list, send email to 
> listserv AT listserv.temple DOT edu and type "signoff networker" in 
> the body of the email. Please write to 
> networker-request AT listserv.temple DOT edu if you have any 
> problems with this list. You can access the archives at 
> http://listserv.temple.edu/archives/networker.html or
> via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
> 

NOTICE
This e-mail and any attachments are confidential and may contain copyright 
material of Macquarie Group Limited or third parties. If you are not the 
intended recipient of this email you should not read, print, re-transmit, store 
or act in reliance on this e-mail or any attachments, and should destroy all 
copies of them. Macquarie Group Limited does not guarantee the integrity of any 
emails or any attached files. The views or opinions expressed are the author's 
own and may not reflect the views or opinions of Macquarie Group Limited.

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER