Both drives have the same WWN, which is probably not helping any.

You mention the drive configuration is an L40 (SCSI drives) attached to a 
SN3300 (SCSI to FC bridge).  It sounds like the 3300 may not be configured 
quite right (if possible each drive should have a unique WWN presented back out 
the FC links); You may need to call Sun for advice or go over what manuals you 
may have.

I looked at SunSolve briefly, but there's nothing there regarding the old 
StorageTek bridge to help there.  The L40 entry was rather sketchy too (but 
that was expected, its a re-brand product).

--TSK

-----=====
Tim Kimball, Sungard/BRASS



ramo wrote:
> mt -f /dev/rmt2.1 status
> 
> rmt2 Available 0A-08-02 Other FC SCSI Tape Drive
> ww_name        0x100000e00223649f
> 
> mt -f /dev/rmt1.1 status
> 
> rmt1 Available 0A-08-02 Other FC SCSI Tape Drive
> ww_name        0x100000e00223649f
> 


+----------------------------------------------------------------------
|This was sent by t.s.kimball AT gmail DOT com via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER