You would have to mount the device as a filesystem and back it up that
way...
Eg: mount -F ufs -o ro /dev/md/dsk/d31 /backup/d31
then specify /backup/d31 as a saveset
Note here that it's really not a very good thing to do if you are
planning to split the mirror while the filesystem is mounted. The
filesystem will not be consistent on disk and you most likely will end
up backing up corrupt data.
With solaris these days you can make ufs snapshots and back those up,
this would probably be a far better solution.
See here:
http://docsun.cites.uiuc.edu/sun_docs/C/solaris_9/SUNWaadm/SYSADV1/p185.
html
> -----Original Message-----
> From: EMC NetWorker discussion
> [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On Behalf Of ktung
> Sent: Tuesday, 27 November 2007 10:08 AM
> To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
> Subject: [Networker] NetWorker 6.1.1 Backup Solaris raw
> device /dev/md/rdsk/d31
>
> Hi All,
>
> I have a Sun DiskSuite 2-way mirror. I want to split the
> mirror and back up the data on the offline submirror. I
> entered the raw device name /dev/md/rdsk/d31 under
> Clients>Save set: /dev/md/rdsk/d31
> However, it only backs up the soft link (/dev/md/rdsk/d31 ->
> ../../../devices/pseudo/md@0:0,31,raw)
>
> Is there a way to do it under NetWorker 6.1.1?
>
> Thanks,
> KT
>
> +-------------------------------------------------------------
> ---------
> |This was sent by kerr_tung AT yahoo DOT com via Backup Central.
> |Forward SPAM to abuse AT backupcentral DOT com.
> +-------------------------------------------------------------
> ---------
>
> To sign off this list, send email to
> listserv AT listserv.temple DOT edu and type "signoff networker" in
> the body of the email. Please write to
> networker-request AT listserv.temple DOT edu if you have any
> problems with this list. You can access the archives at
> http://listserv.temple.edu/archives/networker.html or
> via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
>
NOTICE
This e-mail and any attachments are confidential and may contain copyright
material of Macquarie Group Limited or third parties. If you are not the
intended recipient of this email you should not read, print, re-transmit, store
or act in reliance on this e-mail or any attachments, and should destroy all
copies of them. Macquarie Group Limited does not guarantee the integrity of any
emails or any attached files. The views or opinions expressed are the author's
own and may not reflect the views or opinions of Macquarie Group Limited.
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|