Re: [Networker] Antw: RE: [Networker] verify label problem (NW7.1.2 & AS 2SR3)
2004-07-20 16:07:58
Word fuser is on Linux as well. As well as lsof. Fuser is probably your
better bet.
Thanks,
Chad Smykay, RHCE, LCNA
Systems Storage Administrator
Rackspace Managed Hosting (TM) - The Managed Hosting Specialist (TM)
210-892-4025 ext 1603
Cell: 210-273-2344
-----Original Message-----
From: Legato NetWorker discussion [mailto:NETWORKER AT LISTMAIL.TEMPLE DOT EDU]
On
Behalf Of Darren Dunham
Sent: Tuesday, July 20, 2004 11:11 AM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: Re: [Networker] Antw: RE: [Networker] verify label problem (NW7.1.2
& AS 2SR3)
> As you can see this process is accessing my /dev/nst1 drive.
>
> This information is ONLY useful on Linux servers and I am running RH
> AS 2.1 in my environments. If someone can respond back with any
> equivalents for Sun that would be great.
You can use 'pfiles' or 'lsof' on Sun machines to do something similar, but
I normally use it the other way.
Since I know all my devices, I just see what processes have them open.
fuser /dev/rmt/*cbn
will output the devices and the PID of processes that have them open.
--
Darren Dunham ddunham AT taos DOT com
Senior Technical Consultant TAOS http://www.taos.com/
Got some Dr Pepper? San Francisco, CA bay area
< This line left intentionally blank to confuse you. >
--
Note: To sign off this list, send a "signoff networker" command via email to
listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can also view
and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|
|
|