As an addon to my previous mail
when we look at the status led of the IBM drive we het errror 6 often in this
case. The manual fron IBM that i found on IBM's website states that furter
investigations should be done to see if it is media error or drive error.
I get also less tape hangs if I switch off CDI in the Media -> Device settings
of my IBM drives,

Maarten (quite frustrated about tis one)

On Friday 23 April 2004 17:18, you wrote:
> I have been having some problems like that but I have solaris 9 as the
> server and am using an L700 jukebox with 6 LTO IBM-Ultrium I drives.
>
> Irene
>
> -----Original Message-----
> From: Legato NetWorker discussion [mailto:NETWORKER AT LISTMAIL.TEMPLE DOT 
> EDU]
> On Behalf Of Maine, Daniel
> Sent: Friday, April 23, 2004 9:17 AM
> To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
> Subject: [Networker] LTO Drive or Tape Problem
>
> Setup:
> 6 IBM LTO drives located in a STKL180
> We have 2 drives scsi attached to directly to the Networker server.
> 3 drives are attached to 3 different AIX boxes with one drive daisy
> chained
> to another drive.
> Running 7.1 Networker
>
> Dilemma:
> With the Imation, Maxell, and EMC brand LTO tapes we are experiencing
> the
> following:
> *       Tapes showing full prematurely.
> *       Media surface error
> *       "Just hangs", goes into a loop.
>
> We have not had any problems with the Fuji brand tapes, but, we did not
> catch this in time and our manager is not letting us buy into the tapes
> that
> are working without any problems.
>
> Does anyone have a "fix" for this issue or have experienced the same?
>
> Any help would be greatly appreciated.
>
> Thank you,
> Dan Maine
>
> This email and any files transmitted with it are confidential and
> intended
> solely for the use of the individual or entity to whom they are
> addressed.
> If you have received this email in error please notify the system
> manager.
> Please note that any views or opinions presented in this email are
> solely
> those of the author and do not necessarily represent those of the
> company.
> Finally, the recipient should check this email and any attachments for
> the
> presence of viruses. The company accepts no liability for any damage
> caused
> by any virus transmitted by this email.
>
> --
> Note: To sign off this list, send a "signoff networker" command via
> email
> to listserv AT listmail.temple DOT edu or visit the list's Web site at
> http://listmail.temple.edu/archives/networker.html where you can
> also view and post messages to the list.
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>
> --
> Note: To sign off this list, send a "signoff networker" command via email
> to listserv AT listmail.temple DOT edu or visit the list's Web site at
> http://listmail.temple.edu/archives/networker.html where you can
> also view and post messages to the list.
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=